EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Residual Stress Evaluation in L-PBF-Produced SS 316L Specimens

Matúš Geľatko iD, Michal Hatala iD, František Botko iD, Radoslav Vandžura iD

Materials · 11.05.2024 · 17 (10) · 2270

DOI: 10.3390/ma17102270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.05.2024. Verfasst von Matúš Geľatko und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Manufacturing Technologies, Technical University of Košice with a Seat in Prešov, 080 01 Prešov, Slovakia. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Research and Development Agency, Ministry of Education, Science, Research and Sport of the Slovak Republic, European Regional Development Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The identification of residual stresses (RS) in components made by selective laser melting (SLM) is necessary for subsequent technological optimization. The presented research is devoted to evaluating the influence of the combination of laser power (P), scanning velocity (v) and the rarely considered number of layers (nL) on surface residual stresses in SLM stainless steel SS 316L. Experimental parameters were set based on the Design of Experiment (DoE) method, with follow-up X-ray diffraction (XRD) measurements and data processing using analysis of variance (ANOVA) and regression analysis. The obtained data are a valuable stepping-stone for the subsequent design of research focused on the application of sustainable eco-friendly Abrasive Water Jet (AWJ) peening for RS modification in the evaluated material.

Schlagwörter

Stichwörter der Autor:innen

X-ray diffractionadditive manufacturingnon-destructive testingselective laser meltingstainless steel

Autor:innen und Institutionen

  • Faculty of Manufacturing Technologies, Technical University of Košice with a Seat in Prešov, 080 01 Prešov, Slovakia.

ORCID-Profile: Matúš Geľatko, Michal Hatala, František Botko, Radoslav Vandžura

Förderung

  • Slovak Research and Development Agency
  • Ministry of Education, Science, Research and Sport of the Slovak Republic
  • European Regional Development Fund
  • ERDF

Zitieren

APA

Geľatko, M., Hatala, M., Botko, F., & Vandžura, R. (2024). Residual Stress Evaluation in L-PBF-Produced SS 316L Specimens. Materials, 17(10), 2270. https://doi.org/10.3390/ma17102270

Vancouver

Geľatko M, Hatala M, Botko F, Vandžura R. Residual Stress Evaluation in L-PBF-Produced SS 316L Specimens. Materials. 2024;17(10):2270. doi:10.3390/ma17102270

BibTeX
@article{Geatko2024,
  author = {Geľatko, Matúš and Hatala, Michal and Botko, František and Vandžura, Radoslav},
  title = {Residual Stress Evaluation in L-PBF-Produced SS 316L Specimens},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2270},
  doi = {10.3390/ma17102270}
}
Kostenlos starten →