EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Mechanical Performance and Structural Evaluation of Bamboo-Based Hybrid Composites Modified with Carbon Filler and Graphene Oxide

Iskandar Yasin, Nurul Hasan, Widarto Sutrisno, Andi Ibrahim Soumi

Equivalent: Jurnal Ilmiah Sosial Teknik · 07.08.2026 · 8 (3) · 1166-1181

DOI: 10.59261/jequi.v8i3.289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Equivalent: Jurnal Ilmiah Sosial Teknik, online erschienen am 07.08.2026. Verfasst von Iskandar Yasin und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Bamboo-based composites have attracted attention as sustainable alternatives to conventional structural materials in civil engineering. However, their broader application is often limited by relatively low mechanical performance, weak interfacial bonding between fiber and matrix, and vulnerability to structural failure under loading conditions.

Objective

This study aims to evaluate the mechanical performance and structural behavior of bamboo-based hybrid composites modified with carbon filler and graphene oxide (GO) to enhance strength, improve interfacial bonding, and reduce the risk of structural failure.

Methods

An experimental and numerical approach was employed. Three composite configurations were fabricated and tested (n = 3 specimens per configuration): unfilled bamboo–epoxy (control), carbon-reinforced, and GO-modified composite. Mechanical properties were evaluated through tensile (ASTM D3039) and Charpy impact tests. Finite element analysis (FEA) using ANSYS Workbench validated experimental findings by comparing stress distribution, strain behavior, and total deformation under a 1000 kN axial tensile load, showing strong agreement (R² up to 0.779).

Results

The results show that both carbon filler and GO significantly improve the mechanical properties of bamboo composites. The GO-modified composite exhibited the highest tensile strength and elastic modulus, along with enhanced crack resistance due to improved fiber–matrix adhesion and inhibition of crack propagation. FEA simulations support the experimental findings, demonstrating that GO-modified composites display more uniform stress distribution, lower strain concentration, and reduced deformation compared with the other configurations.

Conclusion

GO-reinforced bamboo hybrid composites demonstrate superior mechanical performance and structural stability, indicating strong potential for mitigating structural failure risks.

Zitieren

APA

Yasin, I., Hasan, N., Sutrisno, W., & Soumi, A. I. (2026). Mechanical Performance and Structural Evaluation of Bamboo-Based Hybrid Composites Modified with Carbon Filler and Graphene Oxide. Equivalent: Jurnal Ilmiah Sosial Teknik, 8(3), 1166-1181. https://doi.org/10.59261/jequi.v8i3.289

Vancouver

Yasin I, Hasan N, Sutrisno W, Soumi AI. Mechanical Performance and Structural Evaluation of Bamboo-Based Hybrid Composites Modified with Carbon Filler and Graphene Oxide. Equivalent: Jurnal Ilmiah Sosial Teknik. 2026;8(3):1166-1181. doi:10.59261/jequi.v8i3.289

BibTeX
@article{Yasin2026,
  author = {Yasin, Iskandar and Hasan, Nurul and Sutrisno, Widarto and Soumi, Andi Ibrahim},
  title = {Mechanical Performance and Structural Evaluation of Bamboo-Based Hybrid Composites Modified with Carbon Filler and Graphene Oxide},
  journal = {Equivalent: Jurnal Ilmiah Sosial Teknik},
  year = {2026},
  volume = {8},
  number = {3},
  pages = {1166--1181},
  doi = {10.59261/jequi.v8i3.289}
}
Kostenlos starten →