Evaluation of GMA-Modified PLA/Bamboo Composites: Mechanical Strength and Biodegradability
ACS Omega · 28.10.2025 · 10 (42) · 49732-49743
DOI: 10.1021/acsomega.5c04934 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 17.10.2025. Verfasst von Hongtao Shi und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Forestry, Guizhou University, Guiyang 550025, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Science Foundation of Guizhou Province, Southwest Forestry University, Guizhou Provincial Science and Technology Department.
Abstract (Originalsprache)
To develop eco-friendly wood-plastic composites (WPCs) with enhanced performance, this study focused on improving the interfacial compatibility between polar plant fibers and the weakly polar polylactic acid (PLA) matrix by grafting glycidyl methacrylate (GMA) onto PLA via solid-phase modification. Using benzoyl peroxide as an initiator in a high-speed mixer, 10 PLA-g-glycidyl methacrylate (PLA-g-GMA) copolymers with varying grafting ratios were synthesized. The chemical structures of these copolymers were characterized using FTIR and 1H NMR spectroscopy. The results indicated that the grafting degree of PLA initially increased and then decreased with increasing GMA content, peaking at 15% GMA with a grafting rate of 9.62%. Bamboo plastic composites (BPCs) were prepared by hot-pressing PLA-g-GMA with bamboo flour (BF). Physical and mechanical testing showed that both water resistance and mechanical properties of the composites initially improved and then declined with increasing GMA content. Notably, the composite based on 13% GMA-modified PLA exhibited the best water resistance, with a 24 h water absorption of only 1.05%. Composites prepared with 15% GMA-modified PLA showed the best overall performance, showing increases in static flexural strength, elastic modulus, and impact strength by 168.86%, 94.06%, and 45.67%, respectively, compared to the unmodified composite. Additionally, the 15% GMA modification slowed soil-burial degradation. These findings indicate that moderate grafting of PLA significantly enhances interfacial adhesion and performance in biobased composites, providing a theoretical foundation and data support for the design of high-performance, environmentally friendly WPCs.
Autor:innen und Institutionen
- College of Forestry, Guizhou University, Guiyang 550025, China.
- International Joint Research Center for Biomass Materials, Southwest Forestry University, Kunming 650224, China.
- School of Materials Science and Engineering, Guizhou Minzu University, Guiyang 550025, China.
ORCID-Profile: Lifen Li
Förderung
- Natural Science Foundation of Guizhou Province
- Southwest Forestry University
- Guizhou Provincial Science and Technology Department
- National Natural Science Foundation of China
- Higher Education Discipline Innovation Project
Zitieren
APA
Shi, H., Zhao, S., Chen, L., Tian, Y., Li, L., Cao, Y., Han, J., & Zhang, L. (2025). Evaluation of GMA-Modified PLA/Bamboo Composites: Mechanical Strength and Biodegradability. ACS Omega, 10(42), 49732-49743. https://doi.org/10.1021/acsomega.5c04934
Vancouver
Shi H, Zhao S, Chen L, Tian Y, Li L, Cao Y, et al. Evaluation of GMA-Modified PLA/Bamboo Composites: Mechanical Strength and Biodegradability. ACS Omega. 2025;10(42):49732-49743. doi:10.1021/acsomega.5c04934
BibTeX
@article{Shi2025,
author = {Shi, Hongtao and Zhao, Shuyu and Chen, Lian and Tian, Yanyang and Li, Lifen and Cao, Yan and Han, Jiangyao and Zhang, Liangran},
title = {Evaluation of GMA-Modified PLA/Bamboo Composites: Mechanical Strength and Biodegradability},
journal = {ACS Omega},
year = {2025},
volume = {10},
number = {42},
pages = {49732--49743},
doi = {10.1021/acsomega.5c04934}
}
EUVIMED