Fluidity of Aluminum Piston Alloy with Different Amount of Pouring Temperature
مجلة جامعة بني وليد للعلوم الإنسانية والتطبيقية · 07.09.2023 · 8 (3) · 31-36
DOI: 10.58916/jhas.v8i3.111 ↗Kurz gefasst
Fachartikel in der Zeitschrift مجلة جامعة بني وليد للعلوم الإنسانية والتطبيقية, online erschienen am 07.09.2023. Verfasst von Zayad M. Sheggaf und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
One of the principal attributes of the aluminum-silicon alloys is their excellent fluidity, or the ability to fill a mold cavity. Fluidity is a complex characteristic that is influenced by surface tension, viscosity, alloy freezing range, melt, cleanliness, superheat, and solidification conditions. Chemical modifiers are generally considered to be detrimental to fluidity despite the fact that all the chemical modifiers commonly in use decrease surface tension. This investigation has been carried out to study the influence of pouring temperature of aluminum piston alloy on casting fluidity and microstructure defects. A strip type of fluidity testing mould was used in this study, and optical microscope to find microstructure defects. The results showed that higher the pouring temperature greater the casting fluidity. Otherwise, the overheating caused porosity, solidification shrinkage, and dross formation into the microstructure of the alloys melted at temperature higher than 760 C°.
Zitieren
APA
Sheggaf, Z. M., Ehzazat, S. S. W., & Esdeira3, A. A. D. (2023). Fluidity of Aluminum Piston Alloy with Different Amount of Pouring Temperature. مجلة جامعة بني وليد للعلوم الإنسانية والتطبيقية, 8(3), 31-36. https://doi.org/10.58916/jhas.v8i3.111
Vancouver
Sheggaf ZM, Ehzazat SSW, Esdeira3 AAD. Fluidity of Aluminum Piston Alloy with Different Amount of Pouring Temperature. مجلة جامعة بني وليد للعلوم الإنسانية والتطبيقية. 2023;8(3):31-36. doi:10.58916/jhas.v8i3.111
BibTeX
@article{Sheggaf2023,
author = {Sheggaf, Zayad M. and Ehzazat, Sharafaddeen S. Wanis and Esdeira3, Almabrouk A. Dhaw},
title = {Fluidity of Aluminum Piston Alloy with Different Amount of Pouring Temperature},
journal = {مجلة جامعة بني وليد للعلوم الإنسانية والتطبيقية},
year = {2023},
volume = {8},
number = {3},
pages = {31--36},
doi = {10.58916/jhas.v8i3.111}
}
EUVIMED