Evaluation of Fe Content on the Fluidity of A356 Aluminum Alloy by New Fluidity Index
International Journal of Metalcasting · 2025-05 · 19 (3) · 1590-1604
DOI: 10.1007/s40962-024-01396-4 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Metalcasting, online erschienen am 16.07.2024. Verfasst von Melek Durmuş und 4 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bayburt University.
Abstract (Originalsprache)
Elements that are deliberately added to aluminum alloys or are incorporated into the alloy later depending on the production process affect the final product properties. In addition, liquid metal cleaning is important in minimizing undesirable elements. Considering the production process, one of the most harmful impurities that is likely to pass into the alloy via diffusion for aluminum is the element, Fe. It is known that this is due to the fact that although Fe is highly soluble in liquid aluminum and its alloys, it has very little solubility in solids. Depending on the Fe content, mechanical properties, porosity and fluidity properties are affected in aluminum alloys. In this study, stainless and carbon steel rods were dipped into the melt at 700 °C and 750 °C for 1, 2 and 5 h. Castings were performed before and after degassing. Four-channel fluidity mold with different section thickness was used in the trials. Additionally, microstructure characterization was performed under varying casting conditions. Fluidity Index was proposed which is a single value measured from all fluidity values in different sections. When the results were examined, it was determined that the diffusion material, holding time, casting temperature and liquid metal cleanliness had an effect on the fluidity. Due to the increase in diffusion time, a decrease in fluidity was observed in both carbon steel and stainless steel. It was found that fluidity was significantly reduced when using stainless steel.
Förderung
- Bayburt University
Zitieren
APA
Durmuş, M., Dispinar, D., Gavgali, M., Uslu, E., & Çolak, M. (2025). Evaluation of Fe Content on the Fluidity of A356 Aluminum Alloy by New Fluidity Index. International Journal of Metalcasting, 19(3), 1590-1604. https://doi.org/10.1007/s40962-024-01396-4
Vancouver
Durmuş M, Dispinar D, Gavgali M, Uslu E, Çolak M. Evaluation of Fe Content on the Fluidity of A356 Aluminum Alloy by New Fluidity Index. International Journal of Metalcasting. 2025;19(3):1590-1604. doi:10.1007/s40962-024-01396-4
BibTeX
@article{Durmu2025,
author = {Durmuş, Melek and Dispinar, Derya and Gavgali, Mehmet and Uslu, Emin and Çolak, Murat},
title = {Evaluation of Fe Content on the Fluidity of A356 Aluminum Alloy by New Fluidity Index},
journal = {International Journal of Metalcasting},
year = {2025},
volume = {19},
number = {3},
pages = {1590--1604},
doi = {10.1007/s40962-024-01396-4}
}
EUVIMED