Analisis Desain Turbin Angin Horizontal 100 W di Pantai Koneng
JTM : JURNAL TEKNIK MESIN · 01.08.2026 · 2 (2) · 82-91
DOI: 10.58466/86etnm35 ↗Kurz gefasst
Fachartikel in der Zeitschrift JTM : JURNAL TEKNIK MESIN, online erschienen am 01.08.2026. Verfasst von Eri Prabowo und 2 weiteren Autor:innen.
Abstract (Originalsprache)
turbine at Pantai Koneng, Dumai, using NACA airfoils and QBlade simulation. The design compares three-blade and five-blade rotor configurations based on measured wind data, blade geometry, coefficient of power, tip speed ratio, rotational speed, and simulated power output. Primary wind data were obtained using a digital anemometer on 15-16 July 2023, while secondary data were taken from BMKG Pekanbaru and windPROSPECTING. The measured average wind speed at Pantai Koneng was 4.00 m/s, with a maximum hourly average of 6.00 m/s and a minimum of 3.00 m/s. The blade radius was set at 2 m with a taperless chord of 0.145 m and twelve blade segments using NACA 4424, NACA 4418, and NACA 4412 airfoils. QBlade results show that the three-blade configuration produces 230.793 W, coefficient of power 0.468, TSR 7, and rotational speed 200 rpm. The five-blade configuration produces 188.354 W, coefficient of power 0.382, TSR 5, and rotational speed 150 rpm. The three-blade rotor is therefore recommended because it provides higher simulated output and better suitability for the intended 100 W design target
Zitieren
APA
Prabowo, E., Putra, T. S. W., & Tampubolon, M. P. H. (2026). Analisis Desain Turbin Angin Horizontal 100 W di Pantai Koneng. JTM : JURNAL TEKNIK MESIN, 2(2), 82-91. https://doi.org/10.58466/86etnm35
Vancouver
Prabowo E, Putra TSW, Tampubolon MPH. Analisis Desain Turbin Angin Horizontal 100 W di Pantai Koneng. JTM : JURNAL TEKNIK MESIN. 2026;2(2):82-91. doi:10.58466/86etnm35
BibTeX
@article{Prabowo2026,
author = {Prabowo, Eri and Putra, Trassanda Scudetto Widestomo and Tampubolon, Michael Putra Humisar},
title = {Analisis Desain Turbin Angin Horizontal 100 W di Pantai Koneng},
journal = {JTM : JURNAL TEKNIK MESIN},
year = {2026},
volume = {2},
number = {2},
pages = {82--91},
doi = {10.58466/86etnm35}
}
EUVIMED