EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Analisis Kinerja Turbin Angin Savonius Dengan Profil Sudu U, Sudu Helix Tanpa End Plate Dan Menggunakan End Plate

Mitra Hari Ramadhan, Muhammad Firman, Heri Irawan

Journal of Mechanical Engineering and Applied Technology · 25.07.2026 · 4 (2) · 89-96

DOI: 10.32497/jmeat.v4i2.7691 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Engineering and Applied Technology, online erschienen am 25.07.2026. Verfasst von Mitra Hari Ramadhan und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to analyze the performance of a Savonius-type wind turbine through variations in blade profile and the addition of an end plate. Experimental testing was conducted using a wind tunnel across three configurations: Model A (U-profile), Model B (helical profile without end plate), and Model C (helical profile with end plate). Wind speed was varied at 3.0 m/s, 4.0 m/s, and 5.0 m/s to evaluate turbine performance, including rotor rotational speed, torque, mechanical power, Tip Speed Ratio (TSR), and power coefficient (Cp). The results demonstrate that blade geometry modification combined with end plate addition significantly improves turbine performance. Model C exhibited the best performance, achieving a maximum mechanical power of 0.36 W and a maximum torque of 0.0135 Nm at a wind speed of 5.0 m/s. Furthermore, Model C attained the highest power coefficient (Cp), with a maximum Cp of 0.16 at a wind speed of 3.0 m/s, indicating the most optimal aerodynamic efficiency. In conclusion, the combination of a helical blade and an end plate effectively reduces tip losses while maximizing energy conversion. This design is therefore strongly recommended for the development of micro-scale wind power generation in regions characterized by low wind speeds.

Zitieren

APA

Ramadhan, M. H., Firman, M., & Irawan, H. (2026). Analisis Kinerja Turbin Angin Savonius Dengan Profil Sudu U, Sudu Helix Tanpa End Plate Dan Menggunakan End Plate. Journal of Mechanical Engineering and Applied Technology, 4(2), 89-96. https://doi.org/10.32497/jmeat.v4i2.7691

Vancouver

Ramadhan MH, Firman M, Irawan H. Analisis Kinerja Turbin Angin Savonius Dengan Profil Sudu U, Sudu Helix Tanpa End Plate Dan Menggunakan End Plate. Journal of Mechanical Engineering and Applied Technology. 2026;4(2):89-96. doi:10.32497/jmeat.v4i2.7691

BibTeX
@article{Ramadhan2026,
  author = {Ramadhan, Mitra Hari and Firman, Muhammad and Irawan, Heri},
  title = {Analisis Kinerja Turbin Angin Savonius Dengan Profil Sudu U, Sudu Helix Tanpa End Plate Dan Menggunakan End Plate},
  journal = {Journal of Mechanical Engineering and Applied Technology},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {89--96},
  doi = {10.32497/jmeat.v4i2.7691}
}
Kostenlos starten →