Guided wave SHM simulation for determining influencing parameters: application on a bolted panel
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/33869 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Arnaud Recoquillay und 5 weiteren Autor:innen.
Abstract (Originalsprache)
Simulation is playing an increasing role in industrial applications, as it enables to optimize design and perform sensitivity analyses without requiring all the costly manufacturing and corresponding test phases. However, there are limitations to what can be simulated, mainly due to inherent uncertainties and unmodeled effects. Uncertainties require to have efficient computational tools, to enable large parametric studies. As for unmodeled effects, efforts can be undergone to enhance models, but this may lead to additional computational costs that will limit the affordable parametric studies. It is the case in particular for SHM, where many parameters such as static load, temperature or aging of the sensors. We will show in this talk how simulation can help to identify relevant parameters and effects of these parameters to consider in a large parametric study by studying separately each of them and comparing their influence. This will be exemplified on the case of two plates riveted together through a third plate, known as a butt splice. In this case, the effect of two environmental conditions on wave propagation, namely a static load and temperature variation, will be compared to determine which needs to be taken into account in the end. The static load is modeled through the definition of a linearized stiffness operator evaluated for the static load, which is used in the wave propagation problem [1]. Temperature effect is considered through the definition of effective material parameters [2]. Other modeling options as well as ongoing work to speedup computations will also be discussed. [1] DALMORA, André, IMPERIALE, Alexandre, IMPERIALE, Sébastien, et al. A time-domain spectral finite element method for acoustoelasticity: modeling the effect of mechanical loading on guided wave propagation. Wave Motion, 2024, vol. 129, p. 103328. [2] GINZEL, Ed et GINZEL, Robert. Approximate dV/dT values for some materials. e-Journal of Nondestructive Testing (eJNDT), 2017.
Zitieren
APA
Recoquillay, A., Imperiale, A., Demaldent, E., Calmon, P., Rautureau, A., & Swindell, P. (2026). Guided wave SHM simulation for determining influencing parameters: application on a bolted panel. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33869
Vancouver
Recoquillay A, Imperiale A, Demaldent E, Calmon P, Rautureau A, Swindell P. Guided wave SHM simulation for determining influencing parameters: application on a bolted panel. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33869
BibTeX
@article{Recoquillay2026,
author = {Recoquillay, Arnaud and Imperiale, Alexandre and Demaldent, Edouard and Calmon, Pierre and Rautureau, Aurélien and Swindell, Paul},
title = {Guided wave SHM simulation for determining influencing parameters: application on a bolted panel},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/33869}
}
EUVIMED