EUVIMEDScopri EUVIMED
Crossref

Acoustic Emission–Based Fatigue Crack Prediction and Microstructural Recognition in Additively Remanufactured Components

Wenxi ZHANG, Xuefei GUAN, Jingjing He

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/34045 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Wenxi ZHANG and 2 co-authors.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

Additive remanufacturing has shown great potential in in-situ repair of in-service components and restoration of end-of-life components. However, the additive remanufacturing process often introduces defects such as residual stress, deformation, and heterogeneous microstructural distributions, which significantly affect fatigue performance and pose challenges for health monitoring and fatigue performance prediction during service. To address fatigue crack propagation monitoring in additively remanufactured components, an online crack length estimation method based on acoustic emission (AE) signals is first developed. AE signals are high-frequency, transient, and noise-contaminated, making direct analysis difficult. In this study, low-dimensional latent variables are extracted from raw AE signals using a one-dimensional convolutional autoencoder. A data-driven causal discovery algorithm is then employed to construct a causal network that characterizes the cause–effect relationships among these latent variables. Based on the constructed causal network, a graph attention network is used to aggregate information from parent nodes to form node embeddings, which are subsequently mapped to crack length labels through a fully connected layer. To address data scarcity in online monitoring scenarios, transfer learning strategies are further introduced by transferring models trained on other specimens. Experimental results show that the proposed crack length estimation method achieves good prediction performance and transferability across different wire and arc additive manufacturing (WAAM) specimens. In additively repaired components, distinct morphological variations exist among different regions. The WAAM region generally exhibits coarse clustered structures, whereas both the heat-affected zone (HAZ) and the base metal (BM) display banded morphologies with notable differences in grain size, orientation, and volume fraction. Such microstructural heterogeneity leads to pronounced distribution shifts in AE responses across regions, making it difficult for a model to learn a unified discriminative basis for crack length prediction. Motivated by this limitation, a further study is conducted to establish a microstructural recognition approach based on AE. An in-situ fatigue testing system integrating scanning electron microscopy imaging and AE monitoring is constructed to synchronously record crack path microstructures and the corresponding AE signals. Based on these data, a recognition method combining supervised contrastive learning and domain adversarial learning is adopted to extract weak microstructural responses under specimen variability and environmental noise. The contrastive loss improves compactness within a class and separation between classes, while an adversarial branch with a gradient reversal layer reduces discrepancies across specimens. Silhouette coefficients are introduced to dynamically adjust the relative weights of the two losses. The model is trained on WAAM and HAZ data and evaluated in a zero-shot setting on BM specimens, achieving an accuracy of 76.38%, with predictions showing good agreement with scanning electron microscopy observations. The results demonstrate the feasibility of using AE signals to estimate fatigue crack propagation and recognize microstructural characteristics, providing a non-invasive solution for monitoring fatigue behaviour of additively remanufactured components under service conditions.

Cite

APA

ZHANG, W., GUAN, X., & He, J. (2026). Acoustic Emission–Based Fatigue Crack Prediction and Microstructural Recognition in Additively Remanufactured Components. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34045

Vancouver

ZHANG W, GUAN X, He J. Acoustic Emission–Based Fatigue Crack Prediction and Microstructural Recognition in Additively Remanufactured Components. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34045

BibTeX
@article{ZHANG2026,
  author = {ZHANG, Wenxi and GUAN, Xuefei and He, Jingjing},
  title = {Acoustic Emission–Based Fatigue Crack Prediction and Microstructural Recognition in Additively Remanufactured Components},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/34045}
}
Start for free →