Laboratory Validation of a Crowdsourced Drive-By Bridge Monitoring Method
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/34018 ↗At a glance
Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Suzana Ereiz and 3 co-authors.
Abstract (original language)
This paper presents a novel approach to the drive-by Structural Health Monitoring (SHM) of bridges based on crowdsourced data collected from multiple vehicle passages. The methodology is experimentally validated on a laboratory-scale bridge model designed to replicate the dynamic behaviour of real bridge structures, exhibiting representative natural frequencies and mode shapes. Acceleration data were acquired using smartphones mounted on a specially adapted vehicle traversing the bridge under varying conditions, including different speeds, directions, and lateral positions. Multiple crossings were conducted to simulate a crowdsourcing scenario, where independent vehicle measurements contribute to a shared monitoring database. This experimental setup enabled the evaluation of how data aggregation from numerous runs can enhance the robustness and accuracy of the drive-by monitoring technique. The collected acceleration signals were processed in MATLAB to extract the bridge’s key dynamic parameters. The analysis focused on estimating natural frequencies and identifying mode shapes based on the aggregated datasets. The results were compared with reference measurements obtained from high-precision accelerometers permanently installed on the bridge model. The identified parameters showed only minor deviations—typically within a few percent—from the reference values, confirming the reliability of the proposed approach. Furthermore, combining data from multiple vehicle passages reduced measurement variability and improved the stability of the identified dynamic characteristics. The findings demonstrate the feasibility and potential of using crowdsourced data for drive-by bridge monitoring with widely available mobile sensors. By leveraging repeated measurements from multiple independent crossings, the study highlights a scalable, low-cost, and non-invasive solution for continuous bridge health assessment. This approach paves the way toward practical implementation of large-scale SHM systems capable of exploiting existing traffic as a dynamic sensing network.
Cite
APA
Ereiz, S., Limongelli, M. P., Malekjafarian, A., & Li, Z. (2026). Laboratory Validation of a Crowdsourced Drive-By Bridge Monitoring Method. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/34018
Vancouver
Ereiz S, Limongelli MP, Malekjafarian A, Li Z. Laboratory Validation of a Crowdsourced Drive-By Bridge Monitoring Method. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/34018
BibTeX
@article{Ereiz2026,
author = {Ereiz, Suzana and Limongelli, Maria Pina and Malekjafarian, Abdollah and Li, Zhenkun},
title = {Laboratory Validation of a Crowdsourced Drive-By Bridge Monitoring Method},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/34018}
}
EUVIMED