Automated Installation and connection of fiber optic sensor network on embedded in Composite Structures
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/33963 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Jesús Sesé und 3 weiteren Autor:innen.
Abstract (Originalsprache)
The potential of Fiber Optic Sensors (FOS) networks for Structural Health Monitoring (SHM) on composite structures is considered high, as they can be easily integrated during the manufacturing phase, without appreciably altering their mechanical properties. However, the current State of the Art is difficult to implement in real aerostructures, as mostly present manual methods to integrate the sensor network in the composite during the manufacturing, even if current manufacturing techniques are automatic, such Automatic Tape Lay Up (ATL) or Fiber Placement (AFP). Additionally, the ingress-egress techniques to connect the embedded network are based on lateral connections, even if all composite structures are trimmed to nominal geometry after the manufacturing. In this work, new automatic optical sensor lay up techniques and new connection methods through the thickness will be explored. First, the automatization of installation of optical fiber sensor network modifying an AFP head will be presented, including an additional optical fiber lay up. This method provides a precise determination of the position of embedded optical fibers. Additionally, it is presented a methodology to connect fiber optics through the thickness. Ultra high accurate fiber location (less than 5 micron) using phased-array ultrasonic inspection method using the phase signal is presented and validated. Experimental composite specimens will be manufactured with optical fiber sensors embedded at different depths and with various coatings and subsequently inspected using an Omniscan MX2 ultrasonic system. Finally, based on the results obtained, different repair and reconnection techniques for optical fibers embedded through the laminate thickness will be evaluated.
Zitieren
APA
Sesé, J., Del-Rio-Velilla, D., Xu, S., & Fernandez-Lopez, A. (2026). Automated Installation and connection of fiber optic sensor network on embedded in Composite Structures. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33963
Vancouver
Sesé J, Del-Rio-Velilla D, Xu S, Fernandez-Lopez A. Automated Installation and connection of fiber optic sensor network on embedded in Composite Structures. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33963
BibTeX
@article{Ses2026,
author = {Sesé, Jesús and Del-Rio-Velilla, Daniel and Xu, Shaojie and Fernandez-Lopez, Antonio},
title = {Automated Installation and connection of fiber optic sensor network on embedded in Composite Structures},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/33963}
}
EUVIMED