EUVIMEDObjevte EUVIMED
Crossref

Temperature-Induced Displacement Monitoring in Large-Span Bridges Using Multitemporal InSAR—A case study

Asmit Roy Burman, Maria Pina Limongelli, John Leander, Raid Karoumi

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33958 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Asmit Roy Burman and 3 co-authors.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Large-span balanced cantilever bridges experience significant thermally induced displacements, and insufficient expansion-joint capacity can lead to elevated internal stresses and long-term structural damage. Addressing this problem conventionally requires installing in-situ sensors, which provide high temporal resolution but are costly, intrusive, and limited in spatial coverage. This study presents a multitemporal Interferometric Synthetic Aperture Radar (InSAR)–based Structural Health Monitoring framework designed to capture and interpret these thermal displacements. A tailored spatial-filtering strategy is developed to address the difficulty of identifying coherent scatterers on slender bridge decks. These points are subsequently grouped by structural control nodes—piers and expansion joints—to isolate differential thermal responses across spans and cantilever segments. The framework is demonstrated on the Strängnäs Bridge in Sweden, which experiences large annual temperature fluctuations from –12 °C to 30 °C. Because Line-of-Sight (LOS) displacement from InSAR alone is not directly interpretable in the longitudinal direction, a short-term in-situ campaign using a Linear Variable Differential Transformer (LVDT) at the main expansion joint is incorporated. This dataset validates the LOS-to-longitudinal displacement projection, enabling long-term thermal-movement tracking even after the ground-truth measurements end. Importantly, the framework is implemented entirely using open-source tools and processing chains, allowing the monitoring to be continuously updated with each new satellite acquisition rather than being limited to a one-off forensic analysis. The integrated system establishes a robust link between calibrated InSAR displacement measurements and thermal loading history, providing a validated operational method for early detection of abnormal thermal-response patterns and improving the management of thermally vulnerable bridge structures.

Cite

APA

Burman, A. R., Limongelli, M. P., Leander, J., & Karoumi, R. (2026). Temperature-Induced Displacement Monitoring in Large-Span Bridges Using Multitemporal InSAR—A case study. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33958

Vancouver

Burman AR, Limongelli MP, Leander J, Karoumi R. Temperature-Induced Displacement Monitoring in Large-Span Bridges Using Multitemporal InSAR—A case study. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33958

BibTeX
@article{Burman2026,
  author = {Burman, Asmit Roy and Limongelli, Maria Pina and Leander, John and Karoumi, Raid},
  title = {Temperature-Induced Displacement Monitoring in Large-Span Bridges Using Multitemporal InSAR—A case study},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33958}
}
Start for free →