EUVIMEDEUVIMED entdecken
Crossref

Design and Development of a low-cost, lightweight phased array Ultrasonic (UT) probe for wind turbine blade inspection

Shishir K. Singh, Roger M. Groves

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33942 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Shishir K. Singh und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrasonic techniques (UT) are a vital technique for detailed wind turbine blade composite inspection. However, in-situ inspection in maintenance is challenging using handheld tools. A development of a lightweight, inexpensive phased array ultrasonic, specifically tailored for wind turbine blade inspection, is presented in this work. The UT probe is based on a 3D-printed structural design to reduce the weight, as a drone used to transport it to the wind turbine blade for in-situ inspection. Further, to maximize coupling performance on Glass Fiber Reinforced Polymer (GFRP) and Carbon Fiber Reinforced Polymer (CFRP) composite surfaces, the study compares the performance of ultrasonic wave propagation in pure silicone as a wheel tyre material and a low-cost sandwich (silicone and cotton) wheel-tyre material with acoustic impedance values closely matched to that of water. 3D-printed parts were used in the design of the probe housing, inexpensive tyre, and wheel assembly to reduce weight, increase manoeuvrability, and lower manufacturing costs without sacrificing structural integrity or acoustic performance. Phased array ultrasonic testing was used for simulation validation in order to assess the suggested probe's imaging potential, fault detectability, and usefulness. The findings show the viability of a flexible, reasonably priced UT inspection tool that can be used to examine large-scale wind turbine blade composite structures. This instrument offers a practical method to collect inspection data, which can be integrated into a digital twin to inform future inspection and repair decisions for wind turbine blades in the field.

Zitieren

APA

Singh, S. K., & Groves, R. M. (2026). Design and Development of a low-cost, lightweight phased array Ultrasonic (UT) probe for wind turbine blade inspection. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33942

Vancouver

Singh SK, Groves RM. Design and Development of a low-cost, lightweight phased array Ultrasonic (UT) probe for wind turbine blade inspection. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33942

BibTeX
@article{Singh2026,
  author = {Singh, Shishir K. and Groves, Roger M.},
  title = {Design and Development of a low-cost, lightweight phased array Ultrasonic (UT) probe for wind turbine blade inspection},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33942}
}
Kostenlos starten →