WTBInspector: An Automated UAV-Based Wind Turbine Blade Inspection System
IEEE Transactions on Field Robotics · 2026 · 3 · 425-451
DOI: 10.1109/tfr.2026.3685949 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Transactions on Field Robotics, 2026. Verfasst von Yichuan Shi und 7 weiteren Autor:innen. Die Arbeit nennt 71 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Guangdong–Hong Kong–Macao Joint Research of Science and Technology Planning Funding, Young Talent Support Project of Guangzhou Association for Science and Technology.
Abstract (Originalsprache)
The rise of the renewable energy industry has propelled the growth of the wind power sector, escalating demands on the operation and maintenance (O&M) of wind turbines. Recent advancements have integrated uncrewed aerial vehicles (UAVs) and automated algorithms, enhancing the efficiency of automated wind turbine blade inspection. Nonetheless, challenges persist in this field. Primarily, critical on-site parameters of stationary turbines, such as turbine yaw, blade rest angle, and tip position, cannot be preobtained from the wind farm operator. Existing methods, however, struggle to accurately estimate turbine tilt angle and blade tip position and have limited applicability for blade rest angle estimation. In addition, neglect of camera orientation during blade surface tracking degrades the imaging effect. Moreover, existing pipelines focus on optimizing image quality after inspection rather than in real time during acquisition, an approach that struggles to recover details lost during the imaging process. To tackle these challenges, we introduce WTBInspector: a fully automated UAV-based wind turbine blade inspection system. This system fulfills three key functions: extracting the turbine structure and estimating complete pose parameters, maintaining camera alignment with the blade surface to ensure orthogonal imaging during blade tracking, and dynamically enhancing image quality in real time during image acquisition. Integrating hardware and software and a ground monitoring application, the system enables efficient and high-quality inspection. Over 600 field inspections have been conducted on ten distinct wind turbine models across five operational wind farms. These inspections covered complex hilly terrain and up to 10-m/s winds, achieving a 99.98% blade surface coverage rate. Except for unsuitability in extreme weather such as heavy rain or dense fog, the field tests confirm that WTBInspector exhibits robustness, applicability, and effectiveness.
Förderung
- National Natural Science Foundation of China
- Guangdong–Hong Kong–Macao Joint Research of Science and Technology Planning Funding
- Young Talent Support Project of Guangzhou Association for Science and Technology
Zitieren
APA
Shi, Y., Liu, H., Zheng, H., Yu, H., Liang, X., Li, J., Ma, M., & Lyu, X. (2026). WTBInspector: An Automated UAV-Based Wind Turbine Blade Inspection System. IEEE Transactions on Field Robotics, 3, 425-451. https://doi.org/10.1109/tfr.2026.3685949
Vancouver
Shi Y, Liu H, Zheng H, Yu H, Liang X, Li J, et al. WTBInspector: An Automated UAV-Based Wind Turbine Blade Inspection System. IEEE Transactions on Field Robotics. 2026;3:425-451. doi:10.1109/tfr.2026.3685949
BibTeX
@article{Shi2026,
author = {Shi, Yichuan and Liu, Hao and Zheng, Haowen and Yu, Haowen and Liang, Xianqi and Li, Jie and Ma, Minmin and Lyu, Ximin},
title = {WTBInspector: An Automated UAV-Based Wind Turbine Blade Inspection System},
journal = {IEEE Transactions on Field Robotics},
year = {2026},
volume = {3},
pages = {425--451},
doi = {10.1109/tfr.2026.3685949}
}
EUVIMED