EUVIMEDOpdag EUVIMED
Crossref

Data-driven delamination detection in CFRP panels using DIC under shear loading

Lorenzo Esposito, Ernesto Monaco, Vittorio Memmolo, Francesco Franco, Giuseppe Petrone, Luigi Grassia

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33913 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Lorenzo Esposito and 5 co-authors.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The ongoing demand for lightweight yet high-performance structures in the aerospace industry has led to the widespread use of carbon fibre reinforced polymers (CFRPs). However, their susceptibility to barely visible impact damage and internal delamination poses a significant challenge to maintaining structural integrity throughout the product's entire service life. Therefore, reliable structural health monitoring (SHM) systems capable of early defect detection and localization are crucial for ensuring safety and reducing maintenance costs in aircraft applications. This study proposes an experimental methodology for detecting and localizing delaminations in quasi-isotropic CFRP plates under shear loading. Four square panels were manufactured: one in pristine condition, and three with an intentionally introduced delamination. A thin square PTFE (Teflon) film was inserted between two plies prior to curing to simulate the defect. This was to represent a manufacturing-induced delamination or an in-service defect. The panels were loaded in a custom-designed fixture that converts uniaxial tensile loading into in-plane diagonal tension. This results in an initial pure shear state, followed by local buckling along the compressive diagonal at higher loads. Full-field digital image correlation (DIC) was employed to monitor the out-of-plane deformation field and its evolution with load. A data-driven detection metric was formulated based on spatially down-sampled out-of-plane displacement maps. This enabled a quantitative comparison to be made between pristine and defective panels under the same loading conditions. Displacement features were extracted using a coarse 10×10 spatial mesh and then processed to find a thresholding-based damage detection approach.

Cite

APA

Esposito, L., Monaco, E., Memmolo, V., Franco, F., Petrone, G., & Grassia, L. (2026). Data-driven delamination detection in CFRP panels using DIC under shear loading. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33913

Vancouver

Esposito L, Monaco E, Memmolo V, Franco F, Petrone G, Grassia L. Data-driven delamination detection in CFRP panels using DIC under shear loading. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33913

BibTeX
@article{Esposito2026,
  author = {Esposito, Lorenzo and Monaco, Ernesto and Memmolo, Vittorio and Franco, Francesco and Petrone, Giuseppe and Grassia, Luigi},
  title = {Data-driven delamination detection in CFRP panels using DIC under shear loading},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33913}
}
Start for free →