EUVIMEDEUVIMED entdecken
Crossref

Estimation of bias in mooring lines tension measurements using an inverse finite element method

Antoine Grosse, Philippe Mainçon, Erin Bachynski-polić, Thomas Sauder

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33891 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-08. Verfasst von Antoine Grosse und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the critical challenges to the scalability, cost-effectiveness, and sustainability of floating offshore wind systems is the fatigue life of mooring lines, which are subjected to loads covering a wide range of amplitudes and frequencies. Structural health monitoring of mooring lines requires accurate tension load history, which is obtained from strain gauges mounted at the fairlead level. However these measurements drift significantly over time and are affected by noise. The present study aims at adressing this issue and performing real-time tension estimation of the mooring lines on a large 22MW floating wind turbine, subjected to wave and wind loads. It is a purely numerical exercise: reference data is obtained from SIMA, a non-linear dynamic fluid-structure coupled solver. The resulting tension signals are artificially polluted with noise and bias, and serve as a starting point to the estimation problem. The reconstruction of the tension is based on an inverse Finite Element method (iFEM). This method formulates an optimization problem with quadratic costs on deviation from measurements and on unknown parameters estimation, while equality constraints enforce the dynamic equilibrium. Results shows fairly good tension estimation and good reconstruction of the model parameters with scarce measurements.

Zitieren

APA

Grosse, A., Mainçon, P., Bachynski-polić, E., & Sauder, T. (2026). Estimation of bias in mooring lines tension measurements using an inverse finite element method. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33891

Vancouver

Grosse A, Mainçon P, Bachynski-polić E, Sauder T. Estimation of bias in mooring lines tension measurements using an inverse finite element method. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33891

BibTeX
@article{Grosse2026,
  author = {Grosse, Antoine and Mainçon, Philippe and Bachynski-polić, Erin and Sauder, Thomas},
  title = {Estimation of bias in mooring lines tension measurements using an inverse finite element method},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33891}
}
Kostenlos starten →