EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Variable Thickness Strain Pre-Extrapolation for the Inverse Finite Element Method

Dario Poloni iD, Daniele Oboe iD, Claudio Sbarufatti iD, Marco Giglio

Sensors · 03.02.2023 · 23 (3) · 1733

DOI: 10.3390/s23031733 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 03.02.2023. Verfasst von Dario Poloni und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Politecnico di Milano, Via La Masa 1, 20156 Milano, Italy. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The inverse Finite Element Method (iFEM) has recently gained much popularity within the Structural Health Monitoring (SHM) field since, given sparse strain measurements, it reconstructs the displacement field of any beam or shell structure independently of the external loading conditions and of the material properties. However, in principle, the iFEM requires a triaxial strain measurement for each inverse finite element, which is seldom feasible in practical applications due to both costs and cabling-related limitations. To alleviate this problem several techniques to pre-extrapolate the measured strains have been developed, so that interpolated or extrapolated strain values are inputted to elements without physical sensors: the benefit is that the required number of sensors can be reduced. Nevertheless, whenever the monitored components comprise regions of different thicknesses, each region of constant thickness must be extrapolated separately, due to thickness-induced discontinuities in the strain field. This is the case in many practical applications, especially those concerning fiber-reinforced composite laminates. This paper proposes to extrapolate the measured strain field in a thickness-normalized space, where the thickness-induced trends are removed; this novel method can significantly decrease the number of required sensors, effectively reducing the costs of iFEM-based SHM systems. The method is validated in a simple but informative numerical case study, highlighting the potentialities and benefits of the proposed approach for more complex application scenarios.

Schlagwörter

Stichwörter der Autor:innen

CFRPGFRPSHMcomposite materialsiFEMinverse Finite Element Methodshape sensing

Autor:innen und Institutionen

  • Mechanical Engineering Department, Politecnico di Milano, Via La Masa 1, 20156 Milano, Italy.

ORCID-Profile: Dario Poloni, Daniele Oboe, Claudio Sbarufatti

Zitieren

APA

Poloni, D., Oboe, D., Sbarufatti, C., & Giglio, M. (2023). Variable Thickness Strain Pre-Extrapolation for the Inverse Finite Element Method. Sensors, 23(3), 1733. https://doi.org/10.3390/s23031733

Vancouver

Poloni D, Oboe D, Sbarufatti C, Giglio M. Variable Thickness Strain Pre-Extrapolation for the Inverse Finite Element Method. Sensors. 2023;23(3):1733. doi:10.3390/s23031733

BibTeX
@article{Poloni2023,
  author = {Poloni, Dario and Oboe, Daniele and Sbarufatti, Claudio and Giglio, Marco},
  title = {Variable Thickness Strain Pre-Extrapolation for the Inverse Finite Element Method},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {3},
  pages = {1733},
  doi = {10.3390/s23031733}
}
Kostenlos starten →