EUVIMEDObjevte EUVIMED
Crossref

Observation of Shock Waves in the Tunnels generated by High Speed Trains through Pre-existing Telecommunication Optical Fiber Cables

Jatin Aggarwal, Doyun Hwang, Jingxiao Liu, Hae Young Noh

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33882 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Jatin Aggarwal and 3 co-authors.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

The increasing prevalence of high-speed rail places significant mechanical demands on tunnel infrastructure. As trains enter and exit tunnels at high velocities, they gen- erate shock waves that induce cyclic stresses on the concrete lining. These stresses can persist beyond the train passage, potentially leading to fatigue-induced fail- ures or the propagation of structural cracks over time. Therefore, continuous monitoring of the strains induced by these shock waves is critical to ensure the safety and durability of tunnel systems. Conventional pressure monitoring techniques, such as pres- sure sensors and acoustic monitoring systems provide localized data but are limited in spatial resolution, costly to install and maintain, and difficult to scale for long tunnels. Furthermore, these systems often require direct installation at specific points of inter- est, restricting their ability to provide a comprehensive understanding of shock wave spatial distribution throughout the tunnel. To this end, we propose a novel approach that leverages pre-existing telecommunication- tion optical fiber cables, originally installed for station communication, to detect strains induced by shock waves. Through the principle of Distributed Acoustic Sens- ing (DAS), pre-existing telecommunication fiber cables can be transformed into dense arrays of virtual strain sensors capable of detecting perturbations along their entire length with meter-level resolution. However, the recorded strain signals include both structural vibrations from train movement, shock waves generated in the air, and other ambient sources of vibration of tunnels. To tackle this challenge, we isolate vibrations induced by the shock waves through a frequency-velocity (f-v) filter. Since shock waves propagate through air at the speed of sound, approximately 343 m/s under standard atmospheric conditions, this known propagation velocity serves as a discriminative feature to isolate them from structural vibrations induced by the train or tunnel infrastructure. By applying the f–v filter, we effectively suppress non-acoustic components in the DAS signal and extract shock waveforms with high spatial (meter-level resolution) and temporal resolution- lution. We validated our approach in a real-world experiment in the Korea Rail tunnels of length of approximately 735 m in South Korea. The proposed method allows us to turn telecommunication optical fiber cables into cost-effective, high-resolution tunnel moni- toring sensors by isolating strains induced from shock waves, offering potential indicators of structural fatigue loads in the tunnels.

Cite

APA

Aggarwal, J., Hwang, D., Liu, J., & Noh, H. Y. (2026). Observation of Shock Waves in the Tunnels generated by High Speed Trains through Pre-existing Telecommunication Optical Fiber Cables. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33882

Vancouver

Aggarwal J, Hwang D, Liu J, Noh HY. Observation of Shock Waves in the Tunnels generated by High Speed Trains through Pre-existing Telecommunication Optical Fiber Cables. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33882

BibTeX
@article{Aggarwal2026,
  author = {Aggarwal, Jatin and Hwang, Doyun and Liu, Jingxiao and Noh, Hae Young},
  title = {Observation of Shock Waves in the Tunnels generated by High Speed Trains through Pre-existing Telecommunication Optical Fiber Cables},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33882}
}
Start for free →