Effect of Material Anisotropy on Time Reversibility of Lamb Waves
e-Journal of Nondestructive Testing · 2026-08 · 31 (8)
DOI: 10.58286/33876 ↗At a glance
Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Bhabagrahi Natha sharma and 3 co-authors.
Abstract (original language)
Composite structures are widely used in the aerospace industry as important load-carrying components due to their excellent performance. However, composite structures are susceptible to impact damage and manufacturing flaws, compelling the designers and airline operators to ensure continuous safety. Lamb wave-based techniques are gaining immense popularity for structural health monitoring (SHM) applications to detect internal and surface damage in thin-walled structures, such as aerospace structures, using embedded and surface-bonded transducers. The damage detection using Lamb waves conventionally relies on a comparison of the damage features of the current response with the baseline response previously obtained from the same structure in its pristine condition. However, the same Lamb wave features vary by a change in the operating temperature of the structure, leading to possible false alarms for damage. To overcome this problem, baseline-free damage detection methods have been pursued in the recent past. Among various techniques, the one based on the time-reversal process (TRP) of Lamb waves has emerged as the most promising candidate for damage detection in thin-walled structures. For a system of sensor arrays to be used for SHM following TRP of Lamb waves, it is essential that a single frequency should be used to probe the structure along all the paths of the sensor array and the time reversibility in an undamaged structure should be the same for all the paths. However, to the best of the author's knowledge, no study has reported how the layup configuration of a composite structure affects the time reversibility of Lamb waves in different paths of a sensor array. The present work aims to numerically study the effect of the layup configuration of the composite structure on the time reversibility of the Lamb waves. The numerical study is conducted using three-dimensional (3D) finite element (FE) simulation in CIVA, which uses a transient spectral finite element. The simulation is conducted on two configurations of composites, namely, quasi-isotropic and cross-ply. A composite plate of 2 mm thickness with 16 laminae of 0.125 mm thickness each is considered. Five transducer locations are considered on each plate in such a way that one transducer (T1) is located at the center and others (T2, T3, T4, and T5) are located on a quarter circle of radius 200 mm. The transducer system constitutes four paths T1-T2, T1-T3, T1-T4, T1-T5 which makes 0°, 22.5°, 45°, and 90° to the global x-axis of the system. The simulation is conducted by first actuating the transducer T1 with a 5-cycle tone burst signal and emitting back the time-reversed version of the response obtained at T2. Then, the normalized version of the reconstructed signal obtained at T1 is compared with the normalized version of the input signal to quantify the degree of the Lamb wave reconstruction. The simulation is being repeated for all the paths and for both plate configurations. The result shows that while in the case of a quasi-isotropic configuration, the variation of the quality of time reversibility obtained for different paths is minimal. Its variation in the case of cross-ply laminate is significant.
Cite
APA
sharma, B. N., Kapuria, S., Haridas, A., & Suresh, A. (2026). Effect of Material Anisotropy on Time Reversibility of Lamb Waves. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33876
Vancouver
sharma BN, Kapuria S, Haridas A, Suresh A. Effect of Material Anisotropy on Time Reversibility of Lamb Waves. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33876
BibTeX
@article{sharma2026,
author = {sharma, Bhabagrahi Natha and Kapuria, Santosh and Haridas, Aswin and Suresh, Anikedh},
title = {Effect of Material Anisotropy on Time Reversibility of Lamb Waves},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {8},
doi = {10.58286/33876}
}
EUVIMED