EUVIMEDOpdag EUVIMED
Crossref

Fully 4D printed actuator-sensor configuration for SHM applications

Giorgos Sarmas, Giannis Oikonomou, Dimitris Dimitriou, Vasileios Stratiotou-efstratiadis, Apostolos Argyros, Ioannis Schoinas, Nikolaos Chrysochoidis, Nikolaos Michailidis, Dimitris Saravanos

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33871 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Giorgos Sarmas and 8 co-authors.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The current work presents the manufacturing, poling, testing and validation of a fully 4D printed strip with two integrated piezopolymer (PVDF) elements with printed electrodes. The configuration is designed based on the pitch and catch concept, where each PVDF can perform either as actuator or sensor for wave-based structural health monitoring (SHM) applications. The whole system is additively manufactured using a multi-material printer and three different materials: ABS (acrylonitrile butadiene styrene) for the host beam, PVDF for the piezoelectric elements and silver conductive ink or conductive epoxy for the electrodes. After the fabrication, contact poling is performed in order to increase the PVDFs piezoelectric properties. In contact poling, a high electric field is applied through-the-thickness on each piezopolymer for a specific time period. The poling efficiency is evaluated through vibration testing, where the piezoelectric constants of each PVDF are approximated using inverse numerical modeling. After successful poling, impact tests and guided wave propagation experiments manifest the capacity of the printed PVDF elements to be used as sensors and actuators. The experimental results manifest the great potential of such 4D printed structural systems in SHM applications.

Cite

APA

Sarmas, G., Oikonomou, G., Dimitriou, D., Stratiotou-efstratiadis, V., Argyros, A., Schoinas, I., Chrysochoidis, N., Michailidis, N., & Saravanos, D. (2026). Fully 4D printed actuator-sensor configuration for SHM applications. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33871

Vancouver

Sarmas G, Oikonomou G, Dimitriou D, Stratiotou-efstratiadis V, Argyros A, Schoinas I, et al. Fully 4D printed actuator-sensor configuration for SHM applications. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33871

BibTeX
@article{Sarmas2026,
  author = {Sarmas, Giorgos and Oikonomou, Giannis and Dimitriou, Dimitris and Stratiotou-efstratiadis, Vasileios and Argyros, Apostolos and Schoinas, Ioannis and Chrysochoidis, Nikolaos and Michailidis, Nikolaos and Saravanos, Dimitris},
  title = {Fully 4D printed actuator-sensor configuration for SHM applications},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33871}
}
Start for free →