EUVIMEDOpdag EUVIMED
Crossref

A hybrid Finite Element method for elastic wave propagation in single and bi-layer strands

Konstantinos Kondylidis, Fabien Treyssede, Laurent Laguerre, Michael J.S. Lowe, Richard V. Craster, Evripides Georgiades, Pierric Mora

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33782 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Konstantinos Kondylidis and 6 co-authors.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Multi-wire cables are high performance structural elements popular in civil engineering applications like bridge systems, offshore structures and the power grid to name a few. Among the non-destructive structural health monitoring techniques available, ultrasonic guided waves afford several advantages in defect detection, as they span large distances and allow inspection in inaccessible areas. On the negative side, the complex helical morphology gives rise to non-trivial tension- and contact-dependent effects, which, combined with the multi-modal and dispersive nature of propagating waves, complicate measurement readings. This necessitates accurate modeling techniques to improve understanding of the underlying physics and facilitate result acquisition. Finite Element (FE) methods dominate elastic wave propagation modeling in multi-layer strands. The Semi Analytical FE (SAFE) method, which merges cross-section discretization with analytical axial propagation description, has successfully reproduced experimentally observed aspects in the 7-wire strand (1 straight core + 6 twisting peripheral wires). More recently, the Wave FE method was applied on a bi-layer cable, utilizing a bi-helical coordinate system and periodic boundary conditions on a 3D unit cell. In both cases, increased numerical cost, necessary for addressing contact effects, makes a simplified method desirable. Along these lines, a simplified closed-form alternative has been proposed for the 7-wire strand, initially 2D, comprised of masses interconnected via Hertzian springs. Expanding on that work, the current objective is a simplified method able to accurately describe elastic wave propagation in a) the 7-wire strand and b) a bi-layer strand, analytically accounting for contact effects, at reduced computational cost. First, longitudinal propagation in the 7-wire strand is accounted for by introducing Timoshenko kinematics enriched by Poisson effects. Dispersion relations are successfully acquired (Fig.1), very close to a FE reference solution within a satisfying low-frequency range, with an additional 3 orders of magnitude reduction in computational cost. Additional force and energy analysis enables organizing modes into zones characterized by their dependence on contact effects, improving intuition on the underlying physics. The addition of a second wire layer (12 wires, twisting in the opposite direction around the 7-wire strand) follows. However, the single-layer method is not readily generalizable to multi-layer cables due to intrinsic modeling restrictions, thus combination with traditional FE is sought. Floquet-Bloch periodic conditions are used on a unit cell, comprised of straight and twisting 1D beam elements, while contact effects are accounted for via appropriate element coupling. Concluding, the method shows potential as a low-cost, elastic wave propagation modeling methodology for multi-wire cables, consistent with complex real-life application requirements.

Cite

APA

Kondylidis, K., Treyssede, F., Laguerre, L., Lowe, M. J., Craster, R. V., Georgiades, E., & Mora, P. (2026). A hybrid Finite Element method for elastic wave propagation in single and bi-layer strands. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33782

Vancouver

Kondylidis K, Treyssede F, Laguerre L, Lowe MJ, Craster RV, Georgiades E, et al. A hybrid Finite Element method for elastic wave propagation in single and bi-layer strands. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33782

BibTeX
@article{Kondylidis2026,
  author = {Kondylidis, Konstantinos and Treyssede, Fabien and Laguerre, Laurent and Lowe, Michael J.S. and Craster, Richard V. and Georgiades, Evripides and Mora, Pierric},
  title = {A hybrid Finite Element method for elastic wave propagation in single and bi-layer strands},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33782}
}
Start for free →