EUVIMEDSkopri EUVIMED
Crossref

Exploring Damage Progression in Carbon-Based TRC Structures Using TDR analysis

Mahdi Gaben, Yiska Goldfeld

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33715 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Mahdi Gaben and 1 co-authors.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Textile Reinforced Concrete (TRC) enables the fabrication of lightweight, thin-walled and sustainable structural elements with smart self-sensing functionality. This smart sensing capability arises from the use of high-strength and electrically conductive yarns, which simultaneously serve as the main reinforcement system as well as the sensory agent. The sensory concept is based on the piezoresistive effect which enables the correlation between changes in electrical properties and structural state, usually by adopting the principles of the gauge factor (GF). Previous studies have demonstrated that the integrative GF can be used to quantitatively estimate global structural health. This study aims to correlate localized microstructural mechanism of TRC elements, such as the formation of cracks, by means of GF. The study assumes that the obtained GF will yield information on both the location and the severity of the cracks. To answer this goal the study proposes investigating local crack phenomena using the Time Domain Reflectometry (TDR) technique. It was demonstrated that the monitoring capability is enabled due to the unique microstructural mechanism of TRC technology. Each yarn consists of thousands of filaments that are bundled together. Due to cracking, the sleeve filaments (located at the outer surface of each carbon yarn) break. The irreversible breakage of these filaments trigger changes in the impedance yielding the monitoring capabilities. However, adopting the TDR technique for carbon yarns is not a straightforward act and some adjustments and pre-procedures are required. The study will discuss these issues. The investigation will be conducted on two levels: (i) the component level, by testing bare carbon yarns with progressively reducing the number of the active filaments, and (ii) the structural level, by exploring TRC elements. In both cases, the impedance spectrum is the measured variable. Preliminary results are shown in Fig. 1. Two parallel carbon yarns are connected to a TDR analyzer. The measurements were taken after actively cutting some of the sleeve filaments in the yarns. It is seen that the impedance change is directly correlated to the filament breakage. These preliminary results will be further investigated and extended. The findings of this study are expected to enhance the understanding of the microstructural mechanisms governing the behavior of TRC structures, thereby contributing to the development of advanced structural health monitoring (SHM) systems.

Cite

APA

Gaben, M., & Goldfeld, Y. (2026). Exploring Damage Progression in Carbon-Based TRC Structures Using TDR analysis. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33715

Vancouver

Gaben M, Goldfeld Y. Exploring Damage Progression in Carbon-Based TRC Structures Using TDR analysis. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33715

BibTeX
@article{Gaben2026,
  author = {Gaben, Mahdi and Goldfeld, Yiska},
  title = {Exploring Damage Progression in Carbon-Based TRC Structures Using TDR analysis},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33715}
}
Start for free →