EUVIMEDScopri EUVIMED
Crossref

A Multisensor Collaborative Strategy for Adaptive Bridge Monitoring

Jiaqi LIU, Xuefeng Zhao, Stefano Mariani

e-Journal of Nondestructive Testing · 2026-08 · 31 (8)

DOI: 10.58286/33709 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-08. Written by Jiaqi LIU and 2 co-authors.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

Continuous bridge monitoring often relies on fixed-frequency data acquisition, which leads to redundant measurements and unnecessary power consumption under varying environmental conditions. This study proposes a hierarchical adaptive sampling strategy for the health monitoring of bridges, developed to balance energy efficiency and response sensitivity under changing environmental and traffic conditions. At the sensor-node level, each lightweight monitoring unit combines a Raspberry Pi with a vision-based strain sensor and a temperature–humidity module. The node automatically adjusts its sampling rate in response to real-time weather information, as retrieved from meteorological data delivered by an online service, and measured strain variations. When the wind level reaches a critical (strong-wind) threshold, the node switches to a high-frequency mode to capture the induced vibrations, otherwise, the node reduces its sampling rate to save energy. Furthermore, moderate or adverse weather such as rain, snow, or dust storms prompts a temporary rate increase to ensure data reliability. This approach allows the monitoring frequency to vary with the environment, providing efficient performance at minimal power cost. At the system coordination level, a cloud-based control layer built on the MQTT protocol manages real-time communication among sensor nodes. The primary node analyses strain signals using a sliding-window method to assess the rate of change and fluctuation intensity. When several consecutive windows exceed predefined thresholds, indicating either strain exceedance or frequent vehicle-induced vibrations, it then sends an alert to the cloud. The cloud then instructs nearby nodes to raise their sampling frequency for synchronised, high-resolution monitoring. Once the strain variations and event rate stabilise below threshold values, the system reverts to its low-frequency mode, maintaining long-term energy balance. The proposed framework has been implemented and tested on an in-service bridge. Field results show that it accurately captures vehicle- and wind-induced strain responses, while reducing the total energy consumption by about 83% compared with fixed-frequency acquisition. The study demonstrates that adaptive sampling effectively enhances the intelligence, autonomy, and energy efficiency of bridge monitoring systems, contributing to the development of smarter and more sustainable monitoring solutions.

Cite

APA

LIU, J., Zhao, X., & Mariani, S. (2026). A Multisensor Collaborative Strategy for Adaptive Bridge Monitoring. e-Journal of Nondestructive Testing, 31(8). https://doi.org/10.58286/33709

Vancouver

LIU J, Zhao X, Mariani S. A Multisensor Collaborative Strategy for Adaptive Bridge Monitoring. e-Journal of Nondestructive Testing. 2026;31(8). doi:10.58286/33709

BibTeX
@article{LIU2026,
  author = {LIU, Jiaqi and Zhao, Xuefeng and Mariani, Stefano},
  title = {A Multisensor Collaborative Strategy for Adaptive Bridge Monitoring},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {8},
  doi = {10.58286/33709}
}
Start for free →