EUVIMEDEUVIMED entdecken
Crossref

Non-destructive testing for HDPE pipes

Canio Mennuti, G. Augugliaro, F Brini, Alessandro Demma, P Quaresima, L. Bruzzo

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33580 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Canio Mennuti und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-density polyethylene (HDPE) is used to manufacture pipes due to its good tensile and flexural strength in the temperature range -40 to +60°C. These pipes have multiple uses, such as: aqueducts, gas transport, sewers, irrigation, fire protection, thermohydraulics, transport of fluids derived from chemical and petrochemical products, slotted pipes for drainage and biogas collection. DCR+RC (Dioxide Chlorine Resistant + Resistant to Crack) pipes have increased resistance to chlorine-based disinfectants and spot loads and incisions, and represent the highest quality standard of PE100 class pipes available on the market today. Non-destructive testing in HDPE pipes, with particular reference to welding, is an important issue for the sector and is regulated by the UNI EN 13100 series of standards, ‘Non-destructive testing of welded joints of thermoplastic semi-finished products’, with specific regulations on visual testing (VT), X-ray radiographic testing (RT) and ultrasonic testing (UT). A significant problem in UT testing of HDPE products is the detection of defect echoes in case of structural noise due to the diffusion of ultrasonic waves and high attenuation of the ultrasonic signal. In this work, ultrasonic and microwave tests were carried out to assess the probability of detecting artificially produced defects in DCR+RC pipes.

Zitieren

APA

Mennuti, C., Augugliaro, G., Brini, F., Demma, A., Quaresima, P., & Bruzzo, L. (2026). Non-destructive testing for HDPE pipes. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33580

Vancouver

Mennuti C, Augugliaro G, Brini F, Demma A, Quaresima P, Bruzzo L. Non-destructive testing for HDPE pipes. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33580

BibTeX
@article{Mennuti2026,
  author = {Mennuti, Canio and Augugliaro, G. and Brini, F and Demma, Alessandro and Quaresima, P and Bruzzo, L.},
  title = {Non-destructive testing for HDPE pipes},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33580}
}
Kostenlos starten →