Microwave Based Non-Destructive Testing for Detecting Cold Welding Defects in Thermal Fusion Welded High-Density Polyethylene Pipes
Polymers · 27.07.2025 · 17 (15) · 2048
DOI: 10.3390/polym17152048 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 27.07.2025. Verfasst von Zhen Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shanghai Institute of Technology, Shanghai 201418, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program China, Chu Ying Plan Program of Zhejiang Provincial Bureau of Market Supervision, Guangdong Provincial Science and Technology Program.
Abstract (Originalsprache)
High-density polyethylene (HDPE) pipes are widely used in urban natural gas pipeline systems due to their excellent mechanical and chemical properties. However, welding joints are critical weak points in these pipelines, and defects, such as cold welding—caused by reduced temperature or/and insufficient pressure—pose significant safety risks. Traditional non-destructive testing (NDT) methods face challenges in detecting cold welding defects due to the polymer’s complex structure and characteristics. This study presents a microwave-based NDT system for detecting cold welding defects in thermal fusion welds of HDPE pipes. The system uses a focusing antenna with a resonant cavity, connected to a vector network analyzer (VNA), to measure changes in microwave parameters caused by cold welding defects in thermal fusion welds. Experiments conducted on HDPE pipes welded at different temperatures demonstrated the system’s effectiveness in identifying areas with a lack of fusion. Mechanical and microstructural analyses, including tensile tests and scanning electron microscopy (SEM), confirmed that cold welding defects lead to reduced mechanical properties and lower material density. The proposed microwave NDT method offers a sensitive, efficient approach for detecting cold welds in HDPE pipelines, enhancing pipeline integrity and safety.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Shanghai Institute of Technology, Shanghai 201418, China.
- Jiaxing Special Equipment Inspection Institute, Jiaxing 314051, China.
- College of Biomedical Engineering, & Yiwu Research Institute, & Zhuhai Fudan Innovation Institute, Fudan University, Shanghai 200433, China.
- Center for Innovation and Entrepreneurship, Taizhou Institute of Zhejiang University, Taizhou 318000, China.
Förderung
- National Key Research and Development Program China
- Chu Ying Plan Program of Zhejiang Provincial Bureau of Market Supervision
- Guangdong Provincial Science and Technology Program
- TZI-ZJU Industrial Program
Zitieren
APA
Wang, Z., Zhu, C., Pan, J., Huang, R., & Tan, L. (2025). Microwave Based Non-Destructive Testing for Detecting Cold Welding Defects in Thermal Fusion Welded High-Density Polyethylene Pipes. Polymers, 17(15), 2048. https://doi.org/10.3390/polym17152048
Vancouver
Wang Z, Zhu C, Pan J, Huang R, Tan L. Microwave Based Non-Destructive Testing for Detecting Cold Welding Defects in Thermal Fusion Welded High-Density Polyethylene Pipes. Polymers. 2025;17(15):2048. doi:10.3390/polym17152048
BibTeX
@article{Wang2025,
author = {Wang, Zhen and Zhu, Chaoming and Pan, Jinping and Huang, Ran and Tan, Lianjiang},
title = {Microwave Based Non-Destructive Testing for Detecting Cold Welding Defects in Thermal Fusion Welded High-Density Polyethylene Pipes},
journal = {Polymers},
year = {2025},
volume = {17},
number = {15},
pages = {2048},
doi = {10.3390/polym17152048}
}
EUVIMED