Non-Destructive Determination of Surface Residual Stresses in Electron Beam Welded AISI 410 Plates using Magnetic Barkhausen Noise Technique
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33513 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Hasan Ilker Yelbay und 1 weiteren Autor:innen.
Abstract (Originalsprache)
This study presents a non-destructive methodology for mapping surface residual stresses in Electron Beam Welded (EBW) AISI 410 martensitic stainless steel using the Magnetic Barkhausen Noise (MBN) technique. While EBW minimizes thermal distortion compared to conventional methods, it still induces significant residual stresses that can compromise structural integrity. To assess these stresses, a custom-developed MBN measurement system with C-scan capability was utilized. A specific calibration methodology was established to correlate MBN signals with the residual stress state. The experimental results were validated through X-ray diffraction (XRD) measurements and Finite Element Method (FEM) simulations. The study revealed a strong correlation between MBN parameters and stress levels, identifying tensile stresses of approximately +350 MPa in the heat-affected zone and compressive stresses of -50 MPa in the base metal. These findings demonstrate that the developed MBN system offers a rapid and reliable solution for the structural health monitoring of critical welded components
Zitieren
APA
Yelbay, H. I., & Gür, C. H. (2026). Non-Destructive Determination of Surface Residual Stresses in Electron Beam Welded AISI 410 Plates using Magnetic Barkhausen Noise Technique. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33513
Vancouver
Yelbay HI, Gür CH. Non-Destructive Determination of Surface Residual Stresses in Electron Beam Welded AISI 410 Plates using Magnetic Barkhausen Noise Technique. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33513
BibTeX
@article{Yelbay2026,
author = {Yelbay, Hasan Ilker and Gür, C. Hakan},
title = {Non-Destructive Determination of Surface Residual Stresses in Electron Beam Welded AISI 410 Plates using Magnetic Barkhausen Noise Technique},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33513}
}
EUVIMED