EUVIMEDEUVIMED entdecken
Crossref

Non-destructive characterization using Barkhausen noise to measure residual stresses of induction hardened steel components

Jonas Holmberg, Per Lundin, Johan Wendel

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Jonas Holmberg und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heat treatment by induction hardening of steel is an important process to increase the material strength and lifespan of automotive engine components. The process is rapid and generates a hard martensitic surface with high compressive surface residual stresses, which are balanced by tensile stresses in the transition zone. The characteristics of the hardened layer are controlled by process parameters affecting the heating and quenching. As current process verification relies only on destructive testing, there is a critical need for non-destructive methods, particularly for assessing high tensile residual stress peaks that may compromise component integrity. Previous studies have used destructive techniques to confirm the presence and magnitude of such peaks under varying process conditions. This work investigates whether Barkhausen noise (BN) measurements can serve as a non-destructive technique for characterizing induction-hardened layers. The BN results exhibit strong correlation with residual stresses measured by X-ray diffraction and effectively capture the steep transition between hardened and non-hardened regions. However, distinguishing differences related to fast and slow heating and quenching remains challenging. Overall, the findings support further development of BN as a non-destructive method for monitoring and verifying induction hardening processes.

Zitieren

APA

Holmberg, J., Lundin, P., & Wendel, J. (2026). Non-destructive characterization using Barkhausen noise to measure residual stresses of induction hardened steel components. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33233

Vancouver

Holmberg J, Lundin P, Wendel J. Non-destructive characterization using Barkhausen noise to measure residual stresses of induction hardened steel components. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33233

BibTeX
@article{Holmberg2026,
  author = {Holmberg, Jonas and Lundin, Per and Wendel, Johan},
  title = {Non-destructive characterization using Barkhausen noise to measure residual stresses of induction hardened steel components},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33233}
}
Kostenlos starten →