EUVIMEDOdkrijte EUVIMED
Crossref

Magnetic hysteresis parameters as non-destructive indicators of microstructure in DP600 steel after controlled thermal cycles

Ane Martinez-de-Guerenu, Mikel Cuenca-Ariza, Iosu Aramendi, Amaia Iza-mendia, Denis Jorge-Badiola

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33503 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-07. Written by Ane Martinez-de-Guerenu and 4 co-authors.

PovzetekBibliografski podatkiCiteRelated studies

Abstract (original language)

Different thermal treatments were applied to DP600 steel using an induction furnace to obtain a broad range of microstructures. Quenching after various soaking conditions produced ferrite–martensite (F-M) structures with martensite fractions (fM) from 23% to 100%, while intercritical slow cooling led to lower martensite/austenite (MA) fractions (~12–16%). Magnetic characterization, based on BH hysteresis loops and differential permeability curves, revealed that the coercive field (Hc) exhibits an almost linear correlation with the martensite fraction and hardness. Samples containing MA phases after slow cooling exhibited clear deviations in multi-magnetic-parameter plots like remanent induction Br versus Hc and the induction value at 4500 A/m (B45) versus Hc, due to their reduced magnetic response compared to F-M samples after quenching. These results confirm that magnetic measurements are effective non-destructive indicators of phase balance, mechanical properties, and microstructural variations induced by thermal cycles in DP steels.

Cite

APA

Martinez-de-Guerenu, A., Cuenca-Ariza, M., Aramendi, I., Iza-mendia, A., & Jorge-Badiola, D. (2026). Magnetic hysteresis parameters as non-destructive indicators of microstructure in DP600 steel after controlled thermal cycles. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33503

Vancouver

Martinez-de-Guerenu A, Cuenca-Ariza M, Aramendi I, Iza-mendia A, Jorge-Badiola D. Magnetic hysteresis parameters as non-destructive indicators of microstructure in DP600 steel after controlled thermal cycles. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33503

BibTeX
@article{MartinezdeGuerenu2026,
  author = {Martinez-de-Guerenu, Ane and Cuenca-Ariza, Mikel and Aramendi, Iosu and Iza-mendia, Amaia and Jorge-Badiola, Denis},
  title = {Magnetic hysteresis parameters as non-destructive indicators of microstructure in DP600 steel after controlled thermal cycles},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33503}
}
Start for free →