Magnetic hysteresis parameters as non-destructive indicators of microstructure in DP600 steel after controlled thermal cycles
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33503 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Ane Martinez-de-Guerenu und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Different thermal treatments were applied to DP600 steel using an induction furnace to obtain a broad range of microstructures. Quenching after various soaking conditions produced ferrite–martensite (F-M) structures with martensite fractions (fM) from 23% to 100%, while intercritical slow cooling led to lower martensite/austenite (MA) fractions (~12–16%). Magnetic characterization, based on BH hysteresis loops and differential permeability curves, revealed that the coercive field (Hc) exhibits an almost linear correlation with the martensite fraction and hardness. Samples containing MA phases after slow cooling exhibited clear deviations in multi-magnetic-parameter plots like remanent induction Br versus Hc and the induction value at 4500 A/m (B45) versus Hc, due to their reduced magnetic response compared to F-M samples after quenching. These results confirm that magnetic measurements are effective non-destructive indicators of phase balance, mechanical properties, and microstructural variations induced by thermal cycles in DP steels.
Zitieren
APA
Martinez-de-Guerenu, A., Cuenca-Ariza, M., Aramendi, I., Iza-mendia, A., & Jorge-Badiola, D. (2026). Magnetic hysteresis parameters as non-destructive indicators of microstructure in DP600 steel after controlled thermal cycles. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33503
Vancouver
Martinez-de-Guerenu A, Cuenca-Ariza M, Aramendi I, Iza-mendia A, Jorge-Badiola D. Magnetic hysteresis parameters as non-destructive indicators of microstructure in DP600 steel after controlled thermal cycles. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33503
BibTeX
@article{MartinezdeGuerenu2026,
author = {Martinez-de-Guerenu, Ane and Cuenca-Ariza, Mikel and Aramendi, Iosu and Iza-mendia, Amaia and Jorge-Badiola, Denis},
title = {Magnetic hysteresis parameters as non-destructive indicators of microstructure in DP600 steel after controlled thermal cycles},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33503}
}
EUVIMED