Time-to-Insight as a Metric for Battery CT Inspection
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33484 ↗At a glance
Journal article in e-Journal of Nondestructive Testing, 2026-07. Written by Christopher Zepp.
Abstract (original language)
The internal structural quality of lithium-ion cells critically affects safety, performance, lifetime, and manufacturing yield. Many manufacturing-induced deviations, including electrode misalignment, overhang violations, jelly-roll eccentricity, and internal voids, are inherently three-dimensional and cannot be reliably detected by electrical end-of-line testing or surface inspection. X-ray computed tomography (CT) provides full-volume, non-destructive access to internal cell geometry, but its use in manufacturing environments has historically been limited by long acquisition and analysis times. This contribution examines a production-oriented CT approach for cylindrical lithium-ion cells that combines micro-CT-level image quality with reduced cycle times suitable for statistical non-destructive testing. Full-cell scans are performed at voxel sizes of approximately 20–30 µm with total cycle times below 20 s, enabling inspection of several cells per minute. The resulting throughput supports population-level characterization of internal geometric parameters and detection of correlated defect trends, positioning CT as a quantitative measurement tool for manufacturing feedback rather than a binary pass/fail inspection.
Cite
APA
Zepp, C. (2026). Time-to-Insight as a Metric for Battery CT Inspection. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33484
Vancouver
Zepp C. Time-to-Insight as a Metric for Battery CT Inspection. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33484
BibTeX
@article{Zepp2026,
author = {Zepp, Christopher},
title = {Time-to-Insight as a Metric for Battery CT Inspection},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33484}
}
EUVIMED