EUVIMEDEUVIMED entdecken
Crossref

Eddy Current and Ultrasonic Near-Surface Flaw Detection in Additively Manufactured Ti-5Al-5V-5Mo-3Cr

Brendan S. Halliday, Kate Van Herpt, Mohammad Ebrahim Bajgholi, Allyson Eastmure, F. Liu, Peter Ross Underhill, Catalin Mandache, Thomas W. Krause

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33426 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Brendan S. Halliday und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive Manufacturing (AM) promises fast fabrication of complex aircraft components. However, the process may introduce porosity and material voids, which can present as near-surface flaws (NSFs) that act as stress raisers leading to premature component failure. Eddy current (EC) and ultrasonic testing (UT) were investigated to detect NSFs in AM Ti-5Al-5V-5Mo-3Cr (Ti-5553) bar samples. Target flaws included implanted 0.5 mm diameter voids, located 0.9 mm below the component’s surface, and 0.67 mm diameter side-drilled holes (SDHs). A transmit-receive EC probe, optimized for sub-surface detection, successfully detected 80% of 16 voids. However, its sensitivity was limited by surface roughness and proximity to sample edges. UT is limited in direct detection of NSFs, due to front-wall interference, which is further affected by surface roughness. Total Focusing Method (TFM), executed in Full Matrix Capture using a 16 element linear array, was investigated for detection of SDHs. TFM achieved high spatial resolution and successfully detected SDHs located 0.4 mm below the surface. This study provides useful guidance for selecting methods to inspect additively manufactured metal components.

Zitieren

APA

Halliday, B. S., Herpt, K. V., Bajgholi, M. E., Eastmure, A., Liu, F., Underhill, P. R., Mandache, C., & Krause, T. W. (2026). Eddy Current and Ultrasonic Near-Surface Flaw Detection in Additively Manufactured Ti-5Al-5V-5Mo-3Cr. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33426

Vancouver

Halliday BS, Herpt KV, Bajgholi ME, Eastmure A, Liu F, Underhill PR, et al. Eddy Current and Ultrasonic Near-Surface Flaw Detection in Additively Manufactured Ti-5Al-5V-5Mo-3Cr. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33426

BibTeX
@article{Halliday2026,
  author = {Halliday, Brendan S. and Herpt, Kate Van and Bajgholi, Mohammad Ebrahim and Eastmure, Allyson and Liu, F. and Underhill, Peter Ross and Mandache, Catalin and Krause, Thomas W.},
  title = {Eddy Current and Ultrasonic Near-Surface Flaw Detection in Additively Manufactured Ti-5Al-5V-5Mo-3Cr},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33426}
}
Kostenlos starten →