Enhanced Near-Surface Flaw Detection in Additively Manufactured Metal Ti-5Al-5V-5Mo-3Cr Using the Total Focusing Method
Sensors · 17.10.2025 · 25 (20) · 6425
DOI: 10.3390/s25206425 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 17.10.2025. Verfasst von Kate van Herpt und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Engineering Physics and Astronomy, Queen's University, Kingston, ON K7L 3N6, Canada. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Council Canada, Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
Additive manufacturing (AM) enables the fabrication of complex components with high geometric freedom, but it can introduce near-surface flaws due to rapid solidification, resulting in porosity and lack of fusion. In addition, localized melting and steep thermal gradients favor the formation of micro-cracks. Conventional ultrasonic techniques have shortcomings in detecting such flaws because of front-wall interference, further affected by surface roughness and anisotropy. This study evaluates the effectiveness of the Total Focusing Method (TFM), an advanced ultrasonic imaging technique implemented in Full Matrix Capture (FMC), for near-surface flaw detection in Laser Powder Bed Fusion (LPBF) AM components. To assess TFM performance, subsurface side-drilled holes (SDHs) in AM Ti-5Al-5V-5Mo-3Cr (Ti-5553) material were used as the reference reflectors and compared with Phased Array Ultrasonic Testing (PAUT) under identical conditions. Results showed that TFM achieved higher spatial resolution and more reliable detection of shallow flaws, successfully detecting features as shallow as 0.40 ± 0.05 mm below the surface, whereas PAUT was limited to greater depths. These findings demonstrate TFM as a reliable non-destructive evaluation method for shallow flaws in AM parts, while contributing one of the first systematic comparative datasets of PAUT and TFM for shallow SDHs in LPBF titanium alloys.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics, Engineering Physics and Astronomy, Queen's University, Kingston, ON K7L 3N6, Canada.
- Department of Mechanical Engineering, École de Technologie Supérieure (ÉTS), Montréal, QC H3C 1K3, Canada.
- Department of Physics and Space Science, Royal Military College of Canada, Kingston, ON K7K 7B4, Canada.
- Aerospace Research Centre, National Research Council Canada, 1200 Montreal Road, Ottawa, ON K1A 0R6, Canada.
ORCID-Profile: Mohammad E Bajgholi, P Ross Underhill, Catalin Mandache
Förderung
- National Research Council Canada
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
van Herpt, K., Bajgholi, M. E., Underhill, P. R., Mandache, C., & Krause, T. W. (2025). Enhanced Near-Surface Flaw Detection in Additively Manufactured Metal Ti-5Al-5V-5Mo-3Cr Using the Total Focusing Method. Sensors, 25(20), 6425. https://doi.org/10.3390/s25206425
Vancouver
van Herpt K, Bajgholi ME, Underhill PR, Mandache C, Krause TW. Enhanced Near-Surface Flaw Detection in Additively Manufactured Metal Ti-5Al-5V-5Mo-3Cr Using the Total Focusing Method. Sensors. 2025;25(20):6425. doi:10.3390/s25206425
BibTeX
@article{vanHerpt2025,
author = {van Herpt, Kate and Bajgholi, Mohammad E and Underhill, P Ross and Mandache, Catalin and Krause, Thomas W},
title = {Enhanced Near-Surface Flaw Detection in Additively Manufactured Metal Ti-5Al-5V-5Mo-3Cr Using the Total Focusing Method},
journal = {Sensors},
year = {2025},
volume = {25},
number = {20},
pages = {6425},
doi = {10.3390/s25206425}
}
EUVIMED