EUVIMEDEUVIMED entdecken
Crossref

Crack characterization in ferromagnetic steel using inductive thermography

Ester D'Accardi, Giuseppe Dell’Avvocato, Davide Palumbo, Umberto Galietti, Beate Oswald-Tranta

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33380 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Ester D'Accardi und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inductive thermography detects surface and near-surface cracks through short induction pulses and infrared temperature measurements. This work examines how crack length, depth, and inclination angle influence the thermal response, using FFT analysis in a lock-in configuration with focus on the phase signal. After optimising coil design and setup parameters, tests on three calibration samples quantify the relationship between defect geometry and thermographic response. Finite element simulations (FEM) will later extend the investigated crack configurations and, combined with the experiments, support a Probability Of Detection (POD) approach for a more reliable assessment of detection capability.

Zitieren

APA

D'Accardi, E., Dell’Avvocato, G., Palumbo, D., Galietti, U., & Oswald-Tranta, B. (2026). Crack characterization in ferromagnetic steel using inductive thermography. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33380

Vancouver

D'Accardi E, Dell’Avvocato G, Palumbo D, Galietti U, Oswald-Tranta B. Crack characterization in ferromagnetic steel using inductive thermography. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33380

BibTeX
@article{DAccardi2026,
  author = {D'Accardi, Ester and Dell’Avvocato, Giuseppe and Palumbo, Davide and Galietti, Umberto and Oswald-Tranta, Beate},
  title = {Crack characterization in ferromagnetic steel using inductive thermography},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33380}
}
Kostenlos starten →