Finite element simulations and their validation for inductive thermography
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33498 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Beate Oswald-Tranta und 1 weiteren Autor:innen.
Abstract (Originalsprache)
In inductive thermography, the sample is heated with a short inductive heating pulse and an infrared camera records the changes at the surface temperature. Surface cracks disturb the eddy current distribution as well as the heat diffusion and are therefore well visible in the infrared images. For simulating this phenomenon, a finite element modeling (FEM) is necessary, which can simulate both the electromagnetic and also the thermal processes. It is investigated, which parameters are important for the modelling of both physical processes, as e.g. which type of grid should be used, what is the optimal grid size and how long should be the time step in the thermal calculation. Furthermore, in which way the surface crack should be considered in the simulation. Validation is performed by comparing the simulation results with experimental results, obtained for artificial cracks with known geometry.
Zitieren
APA
Oswald-Tranta, B., & Ehrenberger, J. (2026). Finite element simulations and their validation for inductive thermography. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33498
Vancouver
Oswald-Tranta B, Ehrenberger J. Finite element simulations and their validation for inductive thermography. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33498
BibTeX
@article{OswaldTranta2026,
author = {Oswald-Tranta, Beate and Ehrenberger, Jean-marie},
title = {Finite element simulations and their validation for inductive thermography},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33498}
}
EUVIMED