EUVIMEDEUVIMED entdecken
Crossref

TFM inspection in lieu of RT on welds of thin WT pipes in stainless steel

Angelo Bruno, Pasquale Miniello

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33372 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Angelo Bruno und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, TFM/FMC technology has increasingly entered the NDT inspection market and is now widely adopted in several industrial applications. TFM offers significant advantages in terms of calibration capability and improved result visualization, enhancing the overall inspection process and supporting more reliable interpretation. However, the intensive algorithmic computation required can introduce delays due to the large volume of data that must be processed by the inspection hardware. The objective of this work is to evaluate the applicability of the TFM approach for inspecting small-diameter, low-thickness stainless steel butt-welds as a potential alternative to radiographic testing (RT), analyzing both advantages and limitations. A direct comparison between TFM and RT results will be performed, focusing on sizing accuracy and relative measurement error. An experimental campaign will be carried out on a representative set of welded samples containing artificial and naturally occurring defects typical of the welding process. The samples will be inspected using a dedicated TFM setup, while RT inspections will be performed as reference. Results from both NDT methods will be compared and analyzed. Finally, industrial applicability will be discussed by comparing fixed and variable costs, inspection cycle time, productivity, and overall cost effectiveness within a realistic industrial scenario.

Zitieren

APA

Bruno, A., & Miniello, P. (2026). TFM inspection in lieu of RT on welds of thin WT pipes in stainless steel. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33372

Vancouver

Bruno A, Miniello P. TFM inspection in lieu of RT on welds of thin WT pipes in stainless steel. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33372

BibTeX
@article{Bruno2026,
  author = {Bruno, Angelo and Miniello, Pasquale},
  title = {TFM inspection in lieu of RT on welds of thin WT pipes in stainless steel},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33372}
}
Kostenlos starten →