EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Brief Review on Hot Cracking Austenitic Stainless Steel Welds

Sadok Mehrez, Touileb Kamel, Mohamed M. Z. Ahmed

Crystals · 02.07.2026 · 16 (7) · 433

DOI: 10.3390/cryst16070433 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 02.07.2026. Verfasst von Sadok Mehrez und 2 weiteren Autor:innen. Die Arbeit nennt 148 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam bin Abdulaziz University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hot cracking in welding is a very complex phenomenon. It can happen in the weld metal zone during solidification but also in the heat-affected zone (HAZ). Hot cracking defects are material decohesion that occur at high temperatures along grain boundaries when the strain and strain rate exceed a certain level. The cracks can be internal or open to the surface in the weld bead. During a welding operation, different types of hot cracks can appear, such as hot cracking due to solidification, hot cracking due to liquation, hot cracking due to loss of ductility. The main factors favoring hot solidification cracking include the presence of residual elements and impurities, leading to the formation of a low-melting eutectic; the solidification mode; and mechanical restraints. This review paper gives an introduction to solidification cracking in stainless-steel welds, the weldability of the austenite grades, and the causes of solidification cracking occurrence. The main methods with which to detect and inspect cracks are investigated. Particular focus is placed on TIG (tungsten inert gas), also known as Gas Tungsten Arc Welding (GTAW). A review of the literature reveals that considerable progress has been made in terms of the improvement in the properties of the weld joint through the application of mitigation means and strategies. The effort made by researchers in understanding solidification cracking phenomena has been key to enhancing cracking resistance and ensuring the integrity of structures.

Förderung

  • Prince Sattam bin Abdulaziz University

Zitieren

APA

Mehrez, S., Kamel, T., & Ahmed, M. M. Z. (2026). A Brief Review on Hot Cracking Austenitic Stainless Steel Welds. Crystals, 16(7), 433. https://doi.org/10.3390/cryst16070433

Vancouver

Mehrez S, Kamel T, Ahmed MMZ. A Brief Review on Hot Cracking Austenitic Stainless Steel Welds. Crystals. 2026;16(7):433. doi:10.3390/cryst16070433

BibTeX
@article{Mehrez2026,
  author = {Mehrez, Sadok and Kamel, Touileb and Ahmed, Mohamed M. Z.},
  title = {A Brief Review on Hot Cracking Austenitic Stainless Steel Welds},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {433},
  doi = {10.3390/cryst16070433}
}
Kostenlos starten →