EUVIMEDEUVIMED entdecken
Crossref

Advanced Phased-Array methods for the automated SAW weld inspection with wheel probes

Christof Breidenbach, Prashanth Kumar Chinta, Stephan Falter, Jörg Ininger, Christian Sturm, Thomas Würschig

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Christof Breidenbach und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Submerged Arc Welding (SAW) is highly established for large-diameter, thick-walled pipes used in oil and gas and water infrastructure. High welding speed, deep penetration and consistently reliable weld quality drive the growing industrial relevance of SAW, establishing it as a key technology for heavy‑duty, high‑throughput production environments. Ultrasonic testing is one of the most important tools for quality control. In this context, there are increasing demands on testing capabilities for automated machines in the production cycle. This article will focus on on-bead inspection and tube end testing, both based on wheel probes with integrated Phased-Array probes. These systems allow both, a test with longitudinal waves with perpendicular incidence, as well as with transversal waves inclining in opposing sound beam directions. Depending on the wheel positioning, it is thus possible to detect either transversal defects along the weld or longitudinal defects at the tube end, respectively. The straight probes used for internal defects are designed to a typical equivalent defect size of FBH 3.0 mm. While at the tube end, this leads to a full coverage at circumference, the on-bead probe gives access to a detection in the heat affected zone very close to the weld.

Zitieren

APA

Breidenbach, C., Chinta, P. K., Falter, S., Ininger, J., Sturm, C., & Würschig, T. (2026). Advanced Phased-Array methods for the automated SAW weld inspection with wheel probes. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33292

Vancouver

Breidenbach C, Chinta PK, Falter S, Ininger J, Sturm C, Würschig T. Advanced Phased-Array methods for the automated SAW weld inspection with wheel probes. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33292

BibTeX
@article{Breidenbach2026,
  author = {Breidenbach, Christof and Chinta, Prashanth Kumar and Falter, Stephan and Ininger, Jörg and Sturm, Christian and Würschig, Thomas},
  title = {Advanced Phased-Array methods for the automated SAW weld inspection with wheel probes},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33292}
}
Kostenlos starten →