Feasibility study of applying an advanced phased-array ultrasonic technique to weld inspection in thin stainless-steel sheets
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/33206 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Tarik Iazourene und 2 weiteren Autor:innen.
Abstract (Originalsprache)
As part of non-destructive testing (NDT) operations, Omexom NDT E&S is investigating the use of the advanced phased-array ultrasonic technique TFM-FMC for inspecting welds on thin stainless-steel sheets (4 – 6 mm thick), as a replacement for a restrictive radiographic testing. The objective of this study is to assess the detection and characterization capabilities of the technique on representative mock-ups, containing both artificial defects (notches and drilled holes) and real defects (lack of fusion, porosity, and tungsten inclusions). It includes an optimization phase of key ultrasonic parameters, by varying ultrasonic frequency (5 – 10 MHz), the number of transducer elements (32 – 64), the wave types (straight longitudinal waves; over 50° angled longitudinal / shear waves), and the size of the region of interest (ROI). Additionally, the study investigates various TFM imaging modes, in accordance with standards recommendations. Furthermore, combinations of these modes are tested to improve the signal-to-noise ratio. Finally, adaptive TFM configurations are also evaluated in immersion, especially for non-planar surfaces. Tests results show good abilities of the TFM-FMC technique in terms of defect detection and characterization. More globally, this study of feasibility lays the foundations for future studies on the subject.
Zitieren
APA
Iazourene, T., Laroche, E., & Ponton, J. (2026). Feasibility study of applying an advanced phased-array ultrasonic technique to weld inspection in thin stainless-steel sheets. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33206
Vancouver
Iazourene T, Laroche E, Ponton J. Feasibility study of applying an advanced phased-array ultrasonic technique to weld inspection in thin stainless-steel sheets. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33206
BibTeX
@article{Iazourene2026,
author = {Iazourene, Tarik and Laroche, Etienne and Ponton, Jimmy},
title = {Feasibility study of applying an advanced phased-array ultrasonic technique to weld inspection in thin stainless-steel sheets},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/33206}
}
EUVIMED