EUVIMEDEUVIMED entdecken
Crossref

Ultrasonic Imaging of Flaws in Thick-Walled Impeller Test Blocks Using FMC-TFM and PWI

Prashanth Kumar Chinta, Robert Peip, Stephan Falter, Martin Spies, Giovanni Zappavigna, Lorenzo Parrotta

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Prashanth Kumar Chinta und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heavy-duty impellers are critical rotating components that must withstand extreme pressure and flow conditions, making structural integrity essential. To meet this requirement, a high-speed ultrasonic imaging approach has been developed, integrating advanced data acquisition with GPU-based reconstruction for near real-time performance. Data acquisition is carried out using a high-end ultrasonic platform (USIPxx), while travel-time computations and flaw reconstructions are performed on graphical processing units. An impeller test block of 297 mm thickness containing artificial defects in the form of flat-bottom holes (FBHs) was inspected. These FBHs vary in depth (10–100 mm above the back wall), inclination (0°–20°), and diameter (0.35–1.5 mm). Two state-of-the-art imaging techniques—Full Matrix Capture with Total Focusing Method (FMC-TFM) and Plane Wave Imaging (PWI)—were applied for flaw reconstruction. FMC-TFM employs single-element firing, requiring sufficient ultrasonic energy to penetrate depths up to 300 mm, and provides accurate reconstruction due to wave diffraction around small flaws. In contrast, PWI uses multiple plane-wave excitations, delivering higher energy for deep inspections and faster acquisition. A comparative analysis of both methods was conducted based on image quality and signal-to-noise ratio (S/N). The study emphasizes the trade-offs between accuracy and efficiency, guiding the selection of optimal imaging strategies for critical component inspection.

Zitieren

APA

Chinta, P. K., Peip, R., Falter, S., Spies, M., Zappavigna, G., & Parrotta, L. (2026). Ultrasonic Imaging of Flaws in Thick-Walled Impeller Test Blocks Using FMC-TFM and PWI. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33236

Vancouver

Chinta PK, Peip R, Falter S, Spies M, Zappavigna G, Parrotta L. Ultrasonic Imaging of Flaws in Thick-Walled Impeller Test Blocks Using FMC-TFM and PWI. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33236

BibTeX
@article{Chinta2026,
  author = {Chinta, Prashanth Kumar and Peip, Robert and Falter, Stephan and Spies, Martin and Zappavigna, Giovanni and Parrotta, Lorenzo},
  title = {Ultrasonic Imaging of Flaws in Thick-Walled Impeller Test Blocks Using FMC-TFM and PWI},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33236}
}
Kostenlos starten →