EUVIMEDSkopri EUVIMED
Crossref

Direct Current Magnetic Flux Leakage Testing (DCMFL): Improving Repeatability for Oblique Defects by DC-Demagnetization

Frank Eibofner, Friedrich Hecker

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33158 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-07. Written by Frank Eibofner and 1 co-authors.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

DCMFL testing of ferromagnetic pipes requires two test systems – one for transverse defects (TRANSOMAT) and one for longitudinal defects (ROTOMAT) – followed by an AC demagnetization. Usually, the pipes are first tested with the TRANSOMAT, which leaves a residual axial magnetization in the pipe that superimposes the perpendicular magnetization of the ROTOMAT and compromises its repeatability, especially for oblique defects. To solve this problem, a DC compensation coil is attached to the exit side of the TRANSOMAT. This coil generates an opposing magnetic field that neutralizes the residual axial magnetization before the pipe enters the ROTOMAT. By eliminating the axial magnetization, the ROTOMAT operates under optimal conditions, significantly improving repeatability for oblique defects. The field strength of the compensation coil can be adjusted based on the test signals of the ROTOMAT. Because the ROTOMAT generates a magnetization that rotates in the circumferential direction, which demagnetizes itself again as the pipe is transported through the device, the use of the DC compensation coil not only improves repeatability but also demagnetizes the pipe. Thus, AC demagnetization at the end of the line can be omitted. DCMFL testing with a DC compensation coil improves repeatability, reduces complexity, and ensures minimal residual magnetization.

Cite

APA

Eibofner, F., & Hecker, F. (2026). Direct Current Magnetic Flux Leakage Testing (DCMFL): Improving Repeatability for Oblique Defects by DC-Demagnetization. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33158

Vancouver

Eibofner F, Hecker F. Direct Current Magnetic Flux Leakage Testing (DCMFL): Improving Repeatability for Oblique Defects by DC-Demagnetization. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33158

BibTeX
@article{Eibofner2026,
  author = {Eibofner, Frank and Hecker, Friedrich},
  title = {Direct Current Magnetic Flux Leakage Testing (DCMFL): Improving Repeatability for Oblique Defects by DC-Demagnetization},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33158}
}
Start for free →