EUVIMEDSkopri EUVIMED
Crossref

Manufacturing and Characterisation of artificial-induced Defects in Fibre Metal Laminates for Modal Analysis

Lars Eisele, Daniel Esse, Wilfried V. Liebig

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33104 ↗

At a glance

Journal article in e-Journal of Nondestructive Testing, 2026-07. Written by Lars Eisele and 2 co-authors.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Fibre Metal Laminates combine metallic and fibre-reinforced polymer layers, providing improved fracture toughness, damage tolerance and impact resistance. However, manufacturing-induced defects such as voids and kissing bonds can critically reduce mechanical performance. Modal analysis offers a promising non-destructive approach for their detection by evaluating changes in vibration damping. To enable a reliable correlation between defect characteristics and modal response, reproducible methods for defect induction and characterisation are developed in this study. Controlled void contents are generated in glass prepregs by hot-pressing at different process pressures and characterised by micro-CT, ultrasonic inspection, density measurements and microscopy. These process conditions are then transferred to a reduced Fibre Metal Laminate with one EN AW-2024 T3 aluminium layer. For low void contents, interlaminar adhesion is selectively prevented using release agents to create kissing bonds, verified by sectioning and edge shear tests. Results indicate a positive density–pressure correlation and confirm the reproducible prevention of interfacial bonding.

Cite

APA

Eisele, L., Esse, D., & Liebig, W. V. (2026). Manufacturing and Characterisation of artificial-induced Defects in Fibre Metal Laminates for Modal Analysis. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33104

Vancouver

Eisele L, Esse D, Liebig WV. Manufacturing and Characterisation of artificial-induced Defects in Fibre Metal Laminates for Modal Analysis. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33104

BibTeX
@article{Eisele2026,
  author = {Eisele, Lars and Esse, Daniel and Liebig, Wilfried V.},
  title = {Manufacturing and Characterisation of artificial-induced Defects in Fibre Metal Laminates for Modal Analysis},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33104}
}
Start for free →