EUVIMEDEUVIMED entdecken
Crossref

Non-destructive testing for the safety of an elevated work platform

Luigi Monica, S Anastasi

e-Journal of Nondestructive Testing · 2026-07 · 31 (7)

DOI: 10.58286/33066 ↗

Kurz gefasst

Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Luigi Monica und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, there have been frequent accidents involving the use of elevating work platforms, often caused by structural failure. Analysis of these incidents has shown that the causes of these failures are often due to fatigue, buckling, and improper welding, and that the incidents have occurred on machines installed on vehicles less than ten years after manufacturing. The reasons for these failures are not only due to deficiencies in the design and/or construction but are also rooted in the employer's management of the equipment. The elevating work platforms requires constant monitoring through both routine and extraordinary inspection and maintenance activities. These should be conducted, where necessary, using non-destructive testing methods to ensure a process aimed at maintaining safety conditions. The work, starting from the analysis of accident data related to the use of elevating work platforms and from an illustration of the failures that have occurred, aims to propose a standardization of the use of non-destructive testing in relation to the management of this equipment, to ensure correct manufacturing (with particular reference to welding) and timely inspection and maintenance activities with reference to the assessment of the state of conservation.

Zitieren

APA

Monica, L., & Anastasi, S. (2026). Non-destructive testing for the safety of an elevated work platform. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/33066

Vancouver

Monica L, Anastasi S. Non-destructive testing for the safety of an elevated work platform. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/33066

BibTeX
@article{Monica2026,
  author = {Monica, Luigi and Anastasi, S},
  title = {Non-destructive testing for the safety of an elevated work platform},
  journal = {e-Journal of Nondestructive Testing},
  year = {2026},
  volume = {31},
  number = {7},
  doi = {10.58286/33066}
}
Kostenlos starten →