Online Testing of ERW-Welded Tubes with PAUT
e-Journal of Nondestructive Testing · 2026-07 · 31 (7)
DOI: 10.58286/32914 ↗Kurz gefasst
Fachartikel in der Zeitschrift e-Journal of Nondestructive Testing, 2026-07. Verfasst von Wolfram Deutsch und 5 weiteren Autor:innen.
Abstract (Originalsprache)
A new testing system has been developed by KARL DEUTSCH to facilitate the online inspection of ERW-welded tubes to detect material flaws caused by the welding or descarfing process. With the ECHOGRAPH SNHF PAUT, a robot arm is positioned beside the customer’s inspection line. This arm carries a probe holder into which various phased array probes can be inserted depending on the required diameter range. The concave-shaped probes cover a large area on both sides of the weld seam. During testing, the phased array probe is positioned concentrically to the tube which moves under the probe holder. The tubes are tested in endless mode. The advantage of using phased array technology in this application is the large scanning area, making seam tracking obsolete even if the weld seam is slightly out of position. The system is regularly calibrated with reference defects located parallel to the test line. Typical reference defects are longitudinal notches N5 and N10 and FBH 3.2 mm.
Zitieren
APA
Deutsch, W., Martini, I., Cadeddu, M., Tomnyuk, V., Sayfullaev, T., & Weiler, M. (2026). Online Testing of ERW-Welded Tubes with PAUT. e-Journal of Nondestructive Testing, 31(7). https://doi.org/10.58286/32914
Vancouver
Deutsch W, Martini I, Cadeddu M, Tomnyuk V, Sayfullaev T, Weiler M. Online Testing of ERW-Welded Tubes with PAUT. e-Journal of Nondestructive Testing. 2026;31(7). doi:10.58286/32914
BibTeX
@article{Deutsch2026,
author = {Deutsch, Wolfram and Martini, Igor and Cadeddu, Massimo and Tomnyuk, Vasyl and Sayfullaev, Timur and Weiler, Marius},
title = {Online Testing of ERW-Welded Tubes with PAUT},
journal = {e-Journal of Nondestructive Testing},
year = {2026},
volume = {31},
number = {7},
doi = {10.58286/32914}
}
EUVIMED