Nondestructive Testing of Welded Composite Metal Foams
Advanced Engineering Materials · 22.07.2026 · 28 (14)
DOI: 10.1002/adem.70905 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 14.05.2026. Verfasst von Chinmaya Prerana Inguva und 2 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: U.S. Department of Transportation.
Abstract (Originalsprache)
Steel–steel composite metal foams (S–S CMFs) are advanced cellular materials with hollow stainless‐steel spheres within a stainless‐steel matrix, noted for low density, high specific strength, and exceptional energy absorption. This study investigates X‐ray computed tomography (CT) as a nondestructive testing method to evaluate welded CMF joints produced via induction welding, diffusion bonding, and brazing using Cu and BNi‐2 fillers. CT scans are used to evaluate number of through‐thickness voids and spatial void distribution at the bonded interface. Δ Void metric is defined to quantify difference between postweld spatial void distribution and comparable preweld baseline to evaluate the influence of welding on mechanical performance and failure within samples. Substantial variation in Δ Void of welded CMFs indicates near‐joint failure, while minimal variation in Δ Void for welded CMFs informs away‐from‐joint failure. Δ Void between −2.43% and + 0.41% indicates away‐from‐joint failure, while those beyond this range report near‐joint failure. Scanning electron microscopy (SEM) observations also corroborate that matrix porosities and void percentage influence joint mechanical performance. Results demonstrate the importance of combining CT and SEM techniques to understand microstructural characteristics affecting S–S CMF weld performance. CT enables detection and analysis of internal defects without compromising structure, ensuring safety, and regulatory compliance.
Förderung
- U.S. Department of Transportation
Zitieren
APA
Inguva, C. P., Kaushik, A., & Rabiei, A. (2026). Nondestructive Testing of Welded Composite Metal Foams. Advanced Engineering Materials, 28(14). https://doi.org/10.1002/adem.70905
Vancouver
Inguva CP, Kaushik A, Rabiei A. Nondestructive Testing of Welded Composite Metal Foams. Advanced Engineering Materials. 2026;28(14). doi:10.1002/adem.70905
BibTeX
@article{Inguva2026,
author = {Inguva, Chinmaya Prerana and Kaushik, Aman and Rabiei, Afsaneh},
title = {Nondestructive Testing of Welded Composite Metal Foams},
journal = {Advanced Engineering Materials},
year = {2026},
volume = {28},
number = {14},
doi = {10.1002/adem.70905}
}
EUVIMED