EUVIMEDEUVIMED entdecken
Crossref

Analysis of Thermal Performance of Double Flow Finned Absorber Solar Air Heater

Zar Chi Linn, War War Min Swe, Aung Kyaw Soe, Aung Ko Latt

Proceedings of the International Conference on Advanced Technologies · 2023

DOI: 10.58190/icat.2023.29 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the International Conference on Advanced Technologies, 2023. Verfasst von Zar Chi Linn und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigated the thermal performance of a solar air collector with attached rectangular fins both theoretically and experimentally. The effects of mass flow rate (0.015 kg/s to 0.06 kg/s) and fin spacing on thermal performance and temperature rise were investigated using varying solar radiation intensity (500, 600, 700, and 800 W/m2). The results show that, when using a finned absorber instead of a plane absorber, the maximum thermal efficiency of 1.264 times was achieved. Additionally, at a lower mass flow rate of 0.015 kg/s, a maximum increase in temperature rise has been observed to be 1.243 times greater than that of a plane absorber.

Zitieren

APA

Linn, Z. C., Swe, W. W. M., Soe, A. K., & Latt, A. K. (2023). Analysis of Thermal Performance of Double Flow Finned Absorber Solar Air Heater. Proceedings of the International Conference on Advanced Technologies. https://doi.org/10.58190/icat.2023.29

Vancouver

Linn ZC, Swe WWM, Soe AK, Latt AK. Analysis of Thermal Performance of Double Flow Finned Absorber Solar Air Heater. Proceedings of the International Conference on Advanced Technologies. 2023. doi:10.58190/icat.2023.29

BibTeX
@article{Linn2023,
  author = {Linn, Zar Chi and Swe, War War Min and Soe, Aung Kyaw and Latt, Aung Ko},
  title = {Analysis of Thermal Performance of Double Flow Finned Absorber Solar Air Heater},
  journal = {Proceedings of the International Conference on Advanced Technologies},
  year = {2023},
  doi = {10.58190/icat.2023.29}
}
Kostenlos starten →