Experimental investigation of thermal performance of a solar air heater with perforated obstacles on an absorber plate
Energy Exploration & Exploitation · 2025-11 · 43 (6) · 2665-2685
DOI: 10.1177/01445987251356531 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Exploration & Exploitation, online erschienen am 21.07.2025. Verfasst von Suleiman Ibrahim Mohammad und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zarqa University.
Abstract (Originalsprache)
The thermal performance of solar air heaters can be significantly enhanced by modifying their design to overcome the limitations posed by the thermo-physical properties of air. In this experimental study, the impact of perforated obstacles with varying hole diameters (2, 3, 4, 5, and 6 cm) placed on the absorber plate of a solar air heater was investigated. The primary objective of this study is to experimentally assess the influence of different perforated obstacle configurations on thermal efficiency, effective efficiency, and pressure drop in a solar air heater, thereby identifying the most effective design for optimizing overall system performance. Tests were conducted in Fez city under two mass flow rates (0.025 and 0.039 kg/s). The results indicated a substantial improvement in thermal efficiency and heat exchange due to the turbulence created by the obstacles. At the higher flow rate (0.039 kg/s), the collector under Type V obstacles (hole diameter: 2 cm) achieved a maximum thermal efficiency of 85%, whereas at the lower flow rate (0.025 kg/s), the same obstacle type yielded a thermal efficiency of 69.5%. These values represent increases of 36% and 33%, respectively, compared to a simple collector. Effective efficiency, which considers the pressure drop in the channel, was also analyzed. At 0.039 kg/s, Type V obstacles exhibited an effective efficiency of 36%, while at 0.025 kg/s, the effective efficiency was 33.85%. Despite the increased pressure drop with smaller hole sizes, the enhanced heat transfer and temperature difference ensured an overall improvement in system performance. This study demonstrates that perforated obstacles are a viable method to optimize heat transfer and airflow dynamics in solar air heaters.
Förderung
- Zarqa University
Zitieren
APA
Mohammad, S. I., Owida, H. A., Vasudevan, A., Yaseen, A. B., Awad, I. G. E. A., Abdulsalam, M. I., Saman, B., Ward, Z. H., & Morovati, R. (2025). Experimental investigation of thermal performance of a solar air heater with perforated obstacles on an absorber plate. Energy Exploration & Exploitation, 43(6), 2665-2685. https://doi.org/10.1177/01445987251356531
Vancouver
Mohammad SI, Owida HA, Vasudevan A, Yaseen AB, Awad IGEA, Abdulsalam MI, et al. Experimental investigation of thermal performance of a solar air heater with perforated obstacles on an absorber plate. Energy Exploration & Exploitation. 2025;43(6):2665-2685. doi:10.1177/01445987251356531
BibTeX
@article{Mohammad2025,
author = {Mohammad, Suleiman Ibrahim and Owida, Hamza Abu and Vasudevan, Asokan and Yaseen, Ahmad Bani and Awad, Ishraga Galal Eldin Abdalla and Abdulsalam, Mohammed I and Saman, Bander and Ward, Zahraa Hassan and Morovati, Reza},
title = {Experimental investigation of thermal performance of a solar air heater with perforated obstacles on an absorber plate},
journal = {Energy Exploration & Exploitation},
year = {2025},
volume = {43},
number = {6},
pages = {2665--2685},
doi = {10.1177/01445987251356531}
}
EUVIMED