EUVIMEDEUVIMED entdecken
Crossref

Monitoring of Welding Process Parameters in Gas Tungsten Arc Welding of Carbon Steel Weldments

Regita BENDIKIENE, Saulius BASKUTIS, Jolanta BASKUTIENE, Lina KAVALIAUSKIENE

Mechanics · 05.03.2019 · 25 (1) · 73-81

DOI: 10.5755/j01.mech.25.1.22158 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mechanics, online erschienen am 05.03.2019. Verfasst von Regita BENDIKIENE und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Results of present study show the possibilities to monitor and control the automatic gas tungsten arc welding process using additional filler rod, and investigate the evolution of microstructure and the mechanical characteristics of carbon steel weldments joint under the different welding parameters: welding current, arc voltage, and travel speed. Three types of weldments were produced and tested: build-up welds, U-grooved samples, and butt welds. Penetration and depth of heat affected zone in all types of welds are influenced especially by the welding current. Dendrite structure formed after welding gives a good indication of the thermodynamic processes during liquid metal solidification, welds are free from defects. The welded joints showed that crystal orientation and shape in the weld zone depend on thermodynamic processes during solidification and welding mode. The frequency and size of the successive droplets of the molten metal from the filler rod has been registered by piezoelectric sensor and due to the collected data the welding parameters and herewith the geometry and structure of heat affected zone and weld bead have been controlled. DOI: http://dx.doi.org/10.5755/j01.mech.25.1.22158

Zitieren

APA

BENDIKIENE, R., BASKUTIS, S., BASKUTIENE, J., & KAVALIAUSKIENE, L. (2019). Monitoring of Welding Process Parameters in Gas Tungsten Arc Welding of Carbon Steel Weldments. Mechanics, 25(1), 73-81. https://doi.org/10.5755/j01.mech.25.1.22158

Vancouver

BENDIKIENE R, BASKUTIS S, BASKUTIENE J, KAVALIAUSKIENE L. Monitoring of Welding Process Parameters in Gas Tungsten Arc Welding of Carbon Steel Weldments. Mechanics. 2019;25(1):73-81. doi:10.5755/j01.mech.25.1.22158

BibTeX
@article{BENDIKIENE2019,
  author = {BENDIKIENE, Regita and BASKUTIS, Saulius and BASKUTIENE, Jolanta and KAVALIAUSKIENE, Lina},
  title = {Monitoring of Welding Process Parameters in Gas Tungsten Arc Welding of Carbon Steel Weldments},
  journal = {Mechanics},
  year = {2019},
  volume = {25},
  number = {1},
  pages = {73--81},
  doi = {10.5755/j01.mech.25.1.22158}
}
Kostenlos starten →