Investigate the effects of gas tungsten arc welding process parameters on the mechanical performance of stainless-steel butt joints
Discover Mechanical Engineering · 15.06.2026 · 5 (1)
DOI: 10.1007/s44245-026-00293-w ↗Kurz gefasst
Fachartikel in der Zeitschrift Discover Mechanical Engineering, online erschienen am 15.06.2026. Verfasst von Hailemariam Nigus und 2 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This study investigates the effect of welding input parameters on the tensile strength, bending strength, and hardness properties of welded joints using the Taguchi L9 orthogonal array. The experimental work was conducted on 3 mm AISI 304 stainless steel (SS) specimens in a butt joint configuration using ER308L filler metal. Tensile strength, bending strength, and hardness properties were determined using the tensile tester and Rockwell hardness testers. The maximum tensile strength achieved was 879 MPa, representing a 20% improvement over the base material. The optimal parameter combination for tensile strength was identified as a welding current (WC) of 130 A, gas flow rate (GFR) of 12 L/min, and electrode diameter (ED) of 1.6 mm. The analysis of variance (ANOVA) confirmed that electrode diameter and welding current were the most significant factors affecting the tensile strength of specimens. The highest bending strength is 129.2 MPa, and the hardness value is 100.1HV. Furthermore, the hardness value shows an 8.8% increase compared to the base metal. The ANOVA results confirmed that GFR and WC significantly influenced both bending strength and hardness property. The Metallography examination with the SEM showed the presence of delta ferrite, austenite phases, and dendrite structures in the weld zone.
Zitieren
APA
Nigus, H., Aklilu, G., & Bright, G. (2026). Investigate the effects of gas tungsten arc welding process parameters on the mechanical performance of stainless-steel butt joints. Discover Mechanical Engineering, 5(1). https://doi.org/10.1007/s44245-026-00293-w
Vancouver
Nigus H, Aklilu G, Bright G. Investigate the effects of gas tungsten arc welding process parameters on the mechanical performance of stainless-steel butt joints. Discover Mechanical Engineering. 2026;5(1). doi:10.1007/s44245-026-00293-w
BibTeX
@article{Nigus2026,
author = {Nigus, Hailemariam and Aklilu, Getahun and Bright, Glen},
title = {Investigate the effects of gas tungsten arc welding process parameters on the mechanical performance of stainless-steel butt joints},
journal = {Discover Mechanical Engineering},
year = {2026},
volume = {5},
number = {1},
doi = {10.1007/s44245-026-00293-w}
}
EUVIMED