Use Of Powder Metallurgy Method in The Production of SiC Reinforced Cu-Al-Ni Composites and Characterization of The Production Result
Doğu Fen Bilimleri Dergisi · 2022
DOI: 10.57244/dfbd.1196469 ↗Kurz gefasst
Fachartikel in der Zeitschrift Doğu Fen Bilimleri Dergisi, 2022. Verfasst von Hasan KAÇAN und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 12 Literaturangaben.
Abstract (Originalsprache)
Powder metallurgy (PM) is an important production route of alloys and is also important in terms of its properties and economy. This method is suitable for the production of complex and versatile shapes and structures. In this study, it was tried to improve the microstructure and mechanical properties of CuAlNi and CuAlNi-SiC alloys sintered at constant pressing and constant temperature. Composite samples were manufactured by the PM method by supplementing the CuAlNi powder mixture with SiC powders at different weight ratios (2.5%, 5, 7.5 and 10%) at the micron level. Scanning electron microscope (SEM) and optical microscope were used to determine the microstructures of the manufatured samples, and X-Ray Fluorescence (XRF) and X-Ray Diffraction method (XRD) analyzes were used to determine the phases formed in their internal structures. Micro hardness (HV5) was taken to determine the hardness effect. According to the micro structure results, SiC particles were homogeneously dispersed in the structure. Depending on the increasing SiC reinforcement, an increase in hardness values was observed.
Zitieren
APA
KAÇAN, H., ASGAROV, K., ÇETİN, T., & BİNALİ, R. (2022). Use Of Powder Metallurgy Method in The Production of SiC Reinforced Cu-Al-Ni Composites and Characterization of The Production Result. Doğu Fen Bilimleri Dergisi. https://doi.org/10.57244/dfbd.1196469
Vancouver
KAÇAN H, ASGAROV K, ÇETİN T, BİNALİ R. Use Of Powder Metallurgy Method in The Production of SiC Reinforced Cu-Al-Ni Composites and Characterization of The Production Result. Doğu Fen Bilimleri Dergisi. 2022. doi:10.57244/dfbd.1196469
BibTeX
@article{KAAN2022,
author = {KAÇAN, Hasan and ASGAROV, Khangardash and ÇETİN, Tayfun and BİNALİ, Rüstem},
title = {Use Of Powder Metallurgy Method in The Production of SiC Reinforced Cu-Al-Ni Composites and Characterization of The Production Result},
journal = {Doğu Fen Bilimleri Dergisi},
year = {2022},
doi = {10.57244/dfbd.1196469}
}
EUVIMED