EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Characterization of Recycled-TiC Reinforced AlZnMgCu Powder Metallurgy Composites

Keerthivasan Navaneethakrishnan iD, Anandakrishnan Veeramani iD, Bharat Kumar Chigilipalli iD, Muralimohan Cheepu iD

Materials · 28.09.2024 · 17 (19) · 4773

DOI: 10.3390/ma17194773 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.09.2024. Verfasst von Keerthivasan Navaneethakrishnan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Production Engineering, National Institute of Technology, Tiruchirappalli 620015, India. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycling’s value in conserving scarce resources, avoiding environmental damage to the land, and reducing energy consumption is well known. This research aims to develop a composite that uses recycled reinforcement that was formed through an in situ method to build confidence in the usage of recycled materials. Thus, in connection with defense and aerospace industry applications, aluminum composite alloys receive more interest due to their light weight and high strength with improved mechanical properties; therefore, this research focuses on the fabrication of in situ-developed recycled TiC (r-TiC)-reinforced AlZnMgCu composites, i.e., new recycled materials. Experiments were conducted to determine the synthesized composites’ microstructural, mechanical, tribological, and corrosion properties. The microstructural study showed that r-TiC was distributed uniformly along the grain boundaries until the addition of 12% r-TiC. However, the accumulation of reinforcements began at 14% r-TiC addition and became more aggregated with subsequent increases in the percentage addition of r-TiC. The mechanical and tribological tests showed that the composite with 14% r-TiC was superior to all other compositions, with 60% improved mechanical qualities and the lowest wear rate of 0.0007 mm3/m. Composites containing 2% r-TiC showed the best corrosion resistance, an increase of 22% over AlZnMgCu, without reinforcement.

Schlagwörter

Stichwörter der Autor:innen

AlZnMgCu matrix compositecorrosion behaviormechanical propertiespowder metallurgyretrieved/recycled TiCtribology

Autor:innen und Institutionen

  • Department of Production Engineering, National Institute of Technology, Tiruchirappalli 620015, India.
  • Department of Mechanical Engineering, Vignan's Institute of Information Technology (A), Visakhapatnam 530049, India.
  • Department of Materials System Engineering, Pukyong National Engineering, Busan 46722, Republic of Korea.
  • Vitzronextech Co., Ltd., Ansan 425833, Republic of Korea.

ORCID-Profile: Keerthivasan Navaneethakrishnan, Anandakrishnan Veeramani, Bharat Kumar Chigilipalli, Muralimohan Cheepu

Zitieren

APA

Navaneethakrishnan, K., Veeramani, A., Chigilipalli, B. K., & Cheepu, M. (2024). Synthesis and Characterization of Recycled-TiC Reinforced AlZnMgCu Powder Metallurgy Composites. Materials, 17(19), 4773. https://doi.org/10.3390/ma17194773

Vancouver

Navaneethakrishnan K, Veeramani A, Chigilipalli BK, Cheepu M. Synthesis and Characterization of Recycled-TiC Reinforced AlZnMgCu Powder Metallurgy Composites. Materials. 2024;17(19):4773. doi:10.3390/ma17194773

BibTeX
@article{Navaneethakrishnan2024,
  author = {Navaneethakrishnan, Keerthivasan and Veeramani, Anandakrishnan and Chigilipalli, Bharat Kumar and Cheepu, Muralimohan},
  title = {Synthesis and Characterization of Recycled-TiC Reinforced AlZnMgCu Powder Metallurgy Composites},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {19},
  pages = {4773},
  doi = {10.3390/ma17194773}
}
Kostenlos starten →